New Axial JK body Armor Panels by CFM Hey guys and gals, With the introduction of the new Jeep JK from Axial, we thought you all might like some scale protection. We are planning on making rear corner guards, both shorty version, full version, and comp cut versions. Rocker guards, roof panels, and also tub guards. The tub guards are small pieces that go right behind the front fender between the door and fender, where the JEEP logo is located. They will bolt on with 0-80 hardware helping add to the scale realism. They will be offered in thin gauge sheet metal, thin gauge plain aluminum, and scale aluminum diamond plate. Here are some pics taken from GenRight offroad for those that are unfamiliar with the products we will be making. http://i484.photobucket.com/albums/r...742E50BE52.jpg http://i484.photobucket.com/albums/r...742C9D4507.jpg http://i484.photobucket.com/albums/r...742BBFFC20.jpg There is a vendor thread in the paint and body section of the marketplace. Please keep pricing questions over there. If you have anything else along these lines you want offered please ask. Can't wait to get started!! Clay Carter Fab & Machine |
Re: New Axial JK body Armor Panels by CFM much excite yes! :mrgreen: |
Most all have seen the Wraith panels we make. Here are some examples of the aluminum diamond plate attached with 0-80 hardware. http://i484.photobucket.com/albums/r...F9672E620D.jpg And an idea of the roof panels. http://i484.photobucket.com/albums/r...F95F5C054A.jpg The panels will come with supplied hardware. Depending on the cage design, there may be several different roof skin options. |
Can't wait to see em, especially those rocker guards! |
Re: New Axial JK body Armor Panels by CFM these look great...any thoughts for doing some for a newbright jk?? |
I can but not gonna buy a body at the price people are selling them for. I'm gonna check my local stores and see if I can find one. They just aren't going to be as popular as these. |
Re: New Axial JK body Armor Panels by CFM Quote:
Carter. If your serious, I can ship you a brand new New Bright Jeep JK body to use for mock up for armor products. Just ship it back when your done. I'll buy armor from you for both the Axial JK and the New Bright JK. More people will end up owning the Axial one, but there are thousands of guys out there with new bright JK's right now. PM me if interested. If not I understand. I'm sure you'll be busy once Christmas passes. "thumbsup" |
Re: New Axial JK body Armor Panels by CFM I think the Rockers we mfg are way better than Tonys, (gen-right) Copy ours :mrgreen: Gen-Rights SUCK!!!! :mrgreen: We made Rockers and Gas skids way before Tony. Its ok..... Tony and I are good freinds. www.fourxdoctor.com |
Quote:
|
Re: New Axial JK body Armor Panels by CFM Quote:
Either way, I can't wait to see what armor add-ons you come up with for these Jeep bodies."thumbsup" |
Got my body in today. Will be getting on the designs this week and hopefully have the templates done by the weekend. Will try and start moving product sometime next week. Prices will be in the vendor thread and on the CFM website. Thanks Clay |
1 Attachment(s) Here is the beginnings of the rear quarters. They will have the 0-80 hardware running along the top edge and a few down the rear tailgate area. http://i484.photobucket.com/albums/r...E44739FA76.jpg http://i484.photobucket.com/albums/r...E44BB0605A.jpg I'm thinking of offering then with or without the holes drilled as some may not want to drill their bodies. Please let me know if you have a preference so I can decide. Best part is you only have to remove the taillight for installation. The panel slips in between the body and flares to help hold. I also have 2 roof designs already, just need to make the templates and get busy. Have to finish up current orders first but had to get an idea and feel for what's ahead. Also what do you guys think about trim panels for these stickers areas in the back? Attachment 217248 |
Re: New Axial JK body Armor Panels by CFM Can't wait to see the roof panels. |
Panels will be coming in January. Working on roof skins tomorrow and the sides will also be part of a joint effort with another vendor on bringing his 1:1 companies products for the JK to the scale world. Stay Tuned!!! |
Re: New Axial JK body Armor Panels by CFM Clay I also have a NB body you can use. What are you cutting that diamond plate aluminum with? |
Quote:
|
Re: New Axial JK body Armor Panels by CFM I had already drawn templates for these, ill be interested to see how these turn out first. Are they going under the flares? |
Quote:
|
Re: New Axial JK body Armor Panels by CFM Quote:
|
That's all that's holding the one in the above pic that has not been set up with the hardware yet. |
All times are GMT -6. The time now is 03:19 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com