Project Squirrel ...by Krawler Konceptz 4 Attachment(s) Squirrel has asked us to do a Kustom Body with our KK Scale Pieces. Most of the parts are here to start. Axial rubicon JK body kit with Krawler Konceptz JK kit, Krawler Konceptz Metallic Blue Powertank and Gerry can, Vp 6" Rigid light bar and mount, 3 racing winch with custom hook, Axial light bucket kit, radiator, Proline scale tools, Tamiya hilux wipers, Scott Anthony Designs JK Bikini top, Custom Squirrel 3D logo's. more to come.. Attachment 243661 Body trimmed and without stock grill Attachment 243662 Attachment 243663 All trimmed up to fit the Krawler Konceptz Grill Attachment 243664 |
Re: Project Squirrel ...by Krawler Konceptz 9 Attachment(s) Now to prep for paint. Washed the Krawler Konceptz grill with warm soapy water to clean any oils from manufacturing and hands. Attachment 243665 Attachment 243666 Attachment 243667 Started to paint, remember to use light even coats and allow to dry between coats! Till the part is covered. I'm not finished with the Krawler Konceptz grill just yet..... This what using for my base paint for the grill. Attachment 243668 Attachment 243669 Stage 1 of color done using the Spastix Paint Candy Blue.. Attachment 243670 The Krawler Konceptz grill ready for clear coat. Attachment 243671 Paint done for now......... Attachment 243670 Color out in the sun! Attachment 243672 Attachment 243673 |
Re: Project Squirrel ...by Krawler Konceptz 5 Attachment(s) Tip: when installing your Vp Rigid light bar, use black heat shrink over the wires so they blend into the background. Attachment 243675 Routing the wires for the Vp Rigid light bar. Attachment 243676 Light bar mounted and the Tamiya Hilux windshield wipers. Attachment 243679 Next is to install the Velcro on the top of the JK cage for the MAD SKINZ JK Bikini top from Scott Anthony Designs Attachment 243677 MAD SKINZ JK bikini top from Scott Anthony Designs installed. Attachment 243678 |
Re: Project Squirrel ...by Krawler Konceptz 6 Attachment(s) Now it's time to install the Krawler Konceptz grill. You'll need some shoe goo, paper towel and a hobby knife. Attachment 243680 Fit the Krawler Konceptz grill to the JK body, trim if you see any high spots. A look from the inside before shoe goo. Attachment 243681 Start to apply shoe goo with your hobby knife to the inside where the grill meets the body. Start from one side then go to the other side. Work from each side and meet in the middle. Attachment 243682 Installed and now set aside to allow to fully dry. If you get a little shoe goo on the outside of the body, don't worry allow to dry and then rub the unwanted shoe goo off with your finger. Attachment 243683 Attachment 243684 Another angle. RTR body and KIT body Final teaser, To be continued.......Tomorrow... Attachment 243685 |
Re: Project Squirrel ...by Krawler Konceptz Awesome!! |
Re: Project Squirrel ...by Krawler Konceptz Paint? Don't you make skins? |
Re: Project Squirrel ...by Krawler Konceptz Quote:
This build is for the Krawler Konceptz Scale side!~:twisted: |
Re: Project Squirrel ...by Krawler Konceptz 1 Attachment(s) Quote:
|
Re: Project Squirrel ...by Krawler Konceptz Now thats one good looking squirrel."thumbsup" I'll tell you what. |
Re: Project Squirrel ...by Krawler Konceptz Thank you..."thumbsup" |
Re: Project Squirrel ...by Krawler Konceptz I wish I had your patience, I always seem to screw something up when I paint. Looks fabulous so far. The KK grill is a nice touch, it gives the front end a lot more of a "solid" 3D appearance.."thumbsup" |
Re: Project Squirrel ...by Krawler Konceptz 5 Attachment(s) Before and After Hood Pieces, Squirrel in Rubicon font, Team Squirrel Racing, fenders added...better pictures tomorrow in the daylight."thumbsup" |
Re: Project Squirrel ...by Krawler Konceptz 4 Attachment(s) For install of the light buckets you'll need axial part number AX80045. You will need to trim the lip off the AX80045A-7 so it can fit tight to the backside of the Krawler Konceptz grill Attachment 243974 Light buckets all installed into the Krawler Konceptz grill. You will have to glue the AX80045a-7 buckets to the backside. I used shoe goo. Attachment 243975 The finished look with lights. Just have to add your LED's. Attachment 243976 For an added touch I mounted the radiator from the Axial Exo to the backside of the Krawler Konceptz grill for that extra touch of detail. Attachment 243977 |
Re: Project Squirrel ...by Krawler Konceptz 6 Attachment(s) Day pics... |
Re: Project Squirrel ...by Krawler Konceptz 1 Attachment(s) 3d Logo added... |
Re: Project Squirrel ...by Krawler Konceptz 5 Attachment(s) More KK Goodies... |
Re: Project Squirrel ...by Krawler Konceptz I love the fine details! I hope I can be that good some day. I'm relatively new to customizing my crawler and was wondering if the shoe goo hardens or how well it holds. Must hold up well since everyone seems to use it. |
Re: Project Squirrel ...by Krawler Konceptz Sweet work Their Rob......"thumbsup""thumbsup" |
Re: Project Squirrel ...by Krawler Konceptz ShoeGoo works wonders and flexes when dry so it holds up to abuse really well. Body looks great KK! |
Looking like a killer rig |
All times are GMT -6. The time now is 09:11 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com