Dingo fender flare specs

[realsickclown]

Can somebody help me out here, I am looking for the measurements of the axial dingo fender flare set to see if they will work on my Proline CGR 73 bronco? I am trying to increase the wheel well opening and not lose any appearance. The RC4WD Gladiator tires I run are a pretty fat tire and could use some more room. The goal is to install the fender flares and trim some of the lexan back, I hope.

[jh1985]

Originally Posted by realsickclown

Can somebody help me out here, I am looking for the measurements of the axial dingo fender flare set to see if they will work on my Proline CGR 73 bronco? I am trying to increase the wheel well opening and not lose any appearance. The RC4WD Gladiator tires I run are a pretty fat tire and could use some more room. The goal is to install the fender flares and trim some of the lexan back, I hope.

i have a brand new set ill measure them and take some pictures for scale in a couple of hours when i get home. be about 1-2 hours.

[jh1985]

Originally Posted by jh1985

i have a brand new set ill measure them and take some pictures for scale in a couple of hours when i get home. be about 1-2 hours.

5.5 in wide at bottom
3in wide at top
2.5in tall long side
1.75 tall short side
my camera wont focus time for a new one. thats a 6in ruler.

[realsickclown]

thanks man, that helps alot

[jh1985]

Originally Posted by realsickclown

thanks man, that helps alot

any time