Pro-Line Ford F-100 Honcho Cab

[Pro-Line Racing]

WOW! The truck looks amazing! Love the Flat Iron Tires and the FaultLine Wheels. That two-tone paint on the F-100 Body is Killer! Great job!
You should post a couple of these up the the Pro-Line Reader's Rides Gallery!
Submit Your Ride | Pro-Line Factory Team

[CM9000]

I love fords, but I wont buy proline... ive had to many tear or crack from the bottom up because the "rocker panels" on any proline body ive had is way thinner than the roof or hood. if you changed your way of molding or forming id buy one and try it out.

[JatoTheRipper]

Originally Posted by crawlingman9000

I love fords, but I wont buy proline... ive had to many tear or crack from the bottom up because the "rocker panels" on any proline body ive had is way thinner than the roof or hood. if you changed your way of molding or forming id buy one and try it out.

ProLine are some of the most durable bodies. I don't think the issue is with ProLine. I think it's with you.

[donny8594]

x2 on the above. I have been running a proline body for four years now without any issue.

[CM9000]

some fanboy proline defenders here huh? issue isn't with me, its with the quality of the molding process. pickup a new proline body and cut it. youll feel the thin parts as I stated.

[donny8594]

Originally Posted by crawlingman9000

some fanboy proline defenders here huh? issue isn't with me, its with the quality of the molding process. pickup a new proline body and cut it. youll feel the thin parts as I stated.

ok don't buy one. you can move along now.

[CM9000]

what im gonna get banned from this thread? im waiting a response from proline, not you. like what thickness will it be in? im not moving anywhere. drag brake 100%

[Natedog]

Originally Posted by Dextroyer

I will try and get some nice outdoor shots later. Hoping my ghost flames pop nicely!

Looks awesome!

Originally Posted by Pro-Line Racing

Hello Clayton78,
Pro-Line stands behind each and every one of our products. If you are dissatisfied with your F-100 Body we do apologize. Please contact customerservice@prolineracing.com along with a quick photo of your defective product and we will work on getting you a replacement.

There's great customer service!

What's the possibility of this Ford as a full pickup body in 12.3" wheelbase?

[MattTheGenus]

I dig the 6x6 but at a glance it does say F**K on the door

[Virus1200]

What about chevy 88-98 obs body for honcho or full body without cage?

[Brainstain]

Originally Posted by Virus1200

What about chevy 88-98 obs body for honcho or full body without cage?

I'd buy one or three of these, the 70 Dodge pickup and the 64-66 Chevy that were suggested if you guys made them.

[Dextroyer]

Originally Posted by MattTheGenus

I dig the 6x6 but at a glance it does say F**K on the door

Yeah that is the awesome part of my club logo, isn't it? I have it plastered on the full size Rubicon as well. Google MEGAFLICKS it was a video rental store near me growing up in Hudson, FL. It was my inspiration!

[Dextroyer]

I may have been the only 6x6 entered in the TTC but it was an absolute blast! Not only did it look good but it performed even better! I have always been a fan of the Flat Irons and mainly run class 1. Hopefully a 1.55 Flat Iron comes out so I can have them on everything but my Yeti XL.

[HockmanRCBoys]

Yes sir...I'm loving it...how do the specs compare to say, the f-250 honcho body? One of these on a SMF rear would be awesome!

[d-wray]

Originally Posted by hotrodsoup

Like a 1964-65 would be SSAAAAAAAAAWEEEEEETT!!!

I agree this would be bad ass

[Strub1975]

I saw on the proline site that this body is right at an inch wider than the one i used. it looks a little pinched in the front does it go from the 8 at the doors to 7 in the front ?? looks like it when its laying on the mat with the ruler on it but cant tell 100% from the picture

[Dextroyer]

Originally Posted by Strub1975

I saw on the proline site that this body is right at an inch wider than the one i used. it looks a little pinched in the front does it go from the 8 at the doors to 7 in the front ?? looks like it when its laying on the mat with the ruler on it but cant tell 100% from the picture

about 7 3/4 at the doors and 7 across the grill, good eye!

[dittohead]

So i finally got my 66 ford cab and discovered its just too big for me to use. I measured some of my other proline bodies and this cab is over an inch wider. It would be cool on a 13" wb 2.2 truggy, not a 1.9 scale rig. I own the regular 66 ford body (which is the same size but no pinched nose ) and its also too big. I have the stampede sized 66 ford body as well and it is too small. Super disappointed since this cab cost me $70 cdn and i was really hoping to use it since its my favorite available body. I am a actually building a whole new rig for the 66 ford body with a bed but i guess ill have to find a suitable replacement for my discontinued ford courier body. I wish proline would bring THAT body back!

[Dextroyer]

Sucks to hear that it is too big for ya. I think my 6x6 looks sweet on 1.7 Iroks. Smaller than the 66 Ford SCT body I put on AR60 I had once, and way better than the Duramax Honcho shell in my eyes.

[Natedog]

Originally Posted by dittohead

...I am a actually building a whole new rig for the 66 ford body with a bed but i guess ill have to find a suitable replacement for my discontinued ford courier body. I wish proline would bring THAT body back!

Proline, please make this 66 Ford pickup with an attached bed for 12.3" wheelbase...I'd buy a couple of them yesterday! Bring back the Courier body too, that's a great body.

Originally Posted by Dextroyer

Sucks to hear that it is too big for ya. I think my 6x6 looks sweet on 1.7 Iroks. Smaller than the 66 Ford SCT body I put on AR60 I had once, and way better than the Duramax Honcho shell in my eyes.

X2