Nissan D21 Hardbody Truck Body?
 

I love this project (happens to be a Nylint):

http://www.rccrawler.com/forum/general-crawlers/45728-project-el-cheapo.html

I have a small Nylint and want to do the same. The reason I posted this in here is to see if anyone knows of a source for a relatively scale (in the 1:10 or 1:18 neighborhood) Nissan D21 Hardbody truck body. I don't want a lexan body -- want a toy-grade body like what would have been found on a Radio Shack truck or something similar.

Here's a picture of the truck type I'm looking for:

http://www.jnjhome.net/nissan/images/picpage2.jpg

Anyone have any leads or ideas? I haven't found much on eBay. :-(

Thanks.

It is a lexan body that rockworks has, but prolly the closest thing you will find to what you are looking for.

Tyco made a ABS body but it was a little small and they are hard to find.
Cole82, built up a truck
http://www.rccrawler.com/forum/showt...ghlight=bandit

If your looking for something very scale in 1/10 a Tamiya Kingcab body has all the details even though it is lexan. They are just hard to find, but reproduction bodys popup on ebay from time to time.

Then of course you have Rockwerks.

Thanks guys for the links. That Tyco body is PURRRRRFECT. I'll start looking around.

Thanks also for the mention of that lexan body. I may end up going that route if I can't find the ABS body.

Thanks again!

Re: Nissan D21 Hardbody Truck Body?
 

If anyone is still looking for this body here's one on ebay!
Good luck,
Darrell

Tyco Nissan Hardbody Truck Body for Scale Build | eBay