Simple Honcho Cage Hinge for SCX10 II Here is a simple axial Honcho cage hinge for the scx10 II made out of a piece of axial cage material, two light bar mounting pieces, and two m3 screws. https://uploads.tapatalk-cdn.com/201...664e266f94.jpghttps://uploads.tapatalk-cdn.com/201...85ab88950c.jpghttps://uploads.tapatalk-cdn.com/201...f206a0eed7.jpghttps://uploads.tapatalk-cdn.com/201...9ec8c1ec96.jpg Sent from my iPhone using Tapatalk |
Re: Simple Honcho Cage Hinge for SCX10 II That looks cool. Got any pics of it with the body down? |
Re: Simple Honcho Cage Hinge for SCX10 II I did something similar, but i just made the cross bar the pivot (didn't tighten the screws all the way down...) https://lh3.googleusercontent.com/Dn...w1426-h1069-no I had to use spacers on mine to get it to sit correctly though (just used some rod end balls, can be seen in this picture...) https://lh3.googleusercontent.com/RP...w1426-h1069-no |
Re: Simple Honcho Cage Hinge for SCX10 II I just cut some ends off a piece of meccano and bolted it to the outside of the frame drilled out the hole in the meccano to slide over the cage piece at the end works great https://uploads.tapatalk-cdn.com/201...1bbc51646f.jpg Sent from my LG-H812 using Tapatalk |
All times are GMT -6. The time now is 03:33 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com