Go Back   RCCrawler Forums > RCCrawler General Tech > Paint and Body
Loading

Notices

Thread: VS4-10 inner fender?

Reply
 
LinkBack Thread Tools Display Modes
Old 03-25-2019, 11:17 PM   #1
Rock Crawler
 
Join Date: Jun 2006
Location: LOMPOC
Posts: 701
Default VS4-10 inner fender?

I was thinking about using Plasti-Dip on the inner fenders but on the tire side.

Have any of you done that and does it last at all? I know it’s cheap and I can repaint anytime I do damage. Just thought it would look more realistic with the matte black in there.


As a scale question has anyone 3D printed some? I have a printer and that would be even better for me.


Sent from my iPhone using Tapatalk
CRAZYACE63 is offline   Reply With Quote
Sponsored Links
Old 03-26-2019, 06:21 AM   #2
Go Buckeyes!
 
B-MOW71's Avatar
 
Join Date: Jun 2017
Location: Mid-Ohio
Posts: 4,121
Default Re: VS4-10 inner fender?

I did not use the Plati-Dip, but I did paint both sides with Tamiya PS-5 Black. I then sprayed both sides with Tamiya PS-55 Flat Clear. It gives it the flat black look. And it has held up great so far.
Attached Images
 
B-MOW71 is online now   Reply With Quote
Old 03-26-2019, 01:49 PM   #3
Rock Crawler
 
Join Date: Jun 2006
Location: LOMPOC
Posts: 701
Default Re: VS4-10 inner fender?

Quote:
Originally Posted by B-MOW71 View Post
I did not use the Plati-Dip, but I did paint both sides with Tamiya PS-5 Black. I then sprayed both sides with Tamiya PS-55 Flat Clear. It gives it the flat black look. And it has held up great so far.
Cool. I think I will try the PD and if that just doesn't hold up I will give your paint tip a try.

Thanks
CRAZYACE63 is offline   Reply With Quote
Old 04-11-2019, 02:25 PM   #4
Rock Crawler
 
Join Date: Dec 2005
Location: East Texas
Posts: 870
Default Re: VS4-10 inner fender?

PLastidip works great. I put 5 solid coats down on them and they havent come close to peeling. Just use a washer when bolting them down on the sliders and chassis
Joshs4x4toyz is offline   Reply With Quote
Old 04-12-2019, 03:20 AM   #5
Rock Crawler
 
Join Date: Jun 2006
Location: LOMPOC
Posts: 701
Default Re: VS4-10 inner fender?

Quote:
Originally Posted by Joshs4x4toyz View Post
PLastidip works great. I put 5 solid coats down on them and they havent come close to peeling. Just use a washer when bolting them down on the sliders and chassis
Cool. I'll have to do that on the second set. I just did them in regular paint. I do need to trim them a bit so the body paint doesn't wear off.
CRAZYACE63 is offline   Reply With Quote
Reply



VS4-10 inner fender? - Similar Threads
Thread Thread Starter Forum Replies Last Post
Other bodies on the VS4-10 mond Vanquish Products VS4-10 Origin 2 05-05-2021 01:15 PM
VS4 for the 1.9 noob mikemcE Vanquish Products VS4-10 Origin 137 04-09-2020 10:01 PM
akumu: vs4-10 v33 Vanquish Products VS4-10 Origin 37 01-07-2020 08:42 AM
Crawler505’s VS4-10 Crawler505 Vanquish Products VS4-10 Origin 19 10-13-2018 08:31 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com