Zr2 body
 

Do they make a camper shell for thr zr2 colorado body

Re: Zr2 body
 

I don’t know of any manufacturer that makes camper shells for RC. Any of the guys you see with camper shells or trailers have made these themselves using polystyrene sheets.

There are some good informational videos on youtube about modeling with PS. Also, plenty of info here on the forums too. If you’re not comfortable doing it yourself, you could always put a request out here on the forums for a commissioned project.

Re: Zr2 body
 

RC4WD makes one for the TF2 toyota, Cross RC makes one for their early 1:10 scale hardbody (not an acual 1:1 truck). I have also seen other companies make them for the TF2 / Tamiya Hilux over the years.

I could be mistaken, but I believe both the RC4WD 4runner and Blazer have removable (back half) tops that could be used as a topper.

Maybe one of those would fit or could be modified to fit.I have only seen the Colorado body in person once, but as I remember it seemed fairly narrow. In the end, your best bet will probably be to make one out of Styrene.

Re: Zr2 body
 

Element RC makes one for the new Trailwalker, as well:

https://www.associatedelectrics.com/...dy_rear_shell/

But to match the ZR2, you'll need to be creative and scratch-build somethin'... "thumbsup"

Zr2 body
 

For a slide in camper, you would need to remove the “sports bar” but that is not easily achieved on a one piece lexan body.

The 1:1 Colorado is not rated / designed for a slide in camper anyway. It’s in the owners manual.


Sent from my iPhone using Tapatalk