RCCrawler Forums
Page 1 of 6 1 23456
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Paint and Body (http://www.rccrawler.com/forum/paint-body/)
-   -   JConcepts Creep!!!! (http://www.rccrawler.com/forum/paint-body/613633-jconcepts-creep.html)

Frank211 12-02-2019 08:56 PM
JConcepts Creep!!!!
 
Check this out
JConcepts New Release – JCI Creep 12.3″ Wheelbase Body – JConcepts Blog

Frank211 12-02-2019 09:01 PM
Re: JConcepts Creep!!!!
 
http://i1253.photobucket.com/albums/...psxreeqhod.png

HumboldtEF 12-02-2019 11:13 PM
Re: JConcepts Creep!!!!
 
I just noticed that on their site. Seems like a decent option and I bet with some customizing it could look awesome.

I'm not sure whats up with the rear though, it looks like there is just a big cutout where the tailgate would be.

https://i.imgur.com/gkCmv9ql.jpg

Too bad about the angle bed support though, I'd wager most crawler bodies (if made thick like they should be) dont really need the extra support these are meant to provide.

I just noticed the JCON-0403 sticker is actually the product number lol it certainly blends in

soze 12-02-2019 11:52 PM
Re: JConcepts Creep!!!!
 
Looks like a body with a lot of clearance. It's basically looks like an updated version of the JConcepts Bog Hog body.

I was looking at the Bog Hog for my SMT10. I might consider this one for a bash and trash body.

lonleycreeper 12-03-2019 07:07 AM
Re: JConcepts Creep!!!!
 
My favorite version.

https://www.fourwheeler.com/project-...ys-4x4-pickup/


https://www.carbuffnetwork.com/proje...kup-don-brown/


I think they nailed it imo. A couple quick mods and this rig wouldn't be hard.

smog 12-03-2019 08:32 AM
Re: JConcepts Creep!!!!
 
For an inexpensive, military inspired body I like it. Based on the photo in this thread it has squared off lines, something the proline gladiator should have but doesn’t. I have to agree with Humboldt, with some customization this thing has a lot of creative potential. JConcepts bodies are typically cheap but good quality, I will likely grab one.

JatoTheRipper 12-03-2019 01:03 PM
Re: JConcepts Creep!!!!
 
I'm not sure why, but I really like it and I had to order one. With the 20% off Cyber Monday coupon the body was under $30. Can't beat it.

Now to find that paint color...

Voodoobrew 12-03-2019 02:00 PM
Re: JConcepts Creep!!!!
 
Nice tight fenders, not a big fan of all the chopped bodies with the fenders cut off. I like this one, the windows look kinda cartoon to me though.

Sent from my SM-N950U using Tapatalk

mewalsh100 12-03-2019 04:53 PM
Re: JConcepts Creep!!!!
 
It’s ok overall - another option any way. The detail is lacking a bit and I don’t care for how they handled the rear, tail gate area. I think it could be made to look pretty good with some cutting, hacking and detailing though.

JatoTheRipper 12-03-2019 05:02 PM
Re: JConcepts Creep!!!!
 
Quote:
Originally Posted by Voodoobrew (Post 5981117)
Nice tight fenders, not a big fan of all the chopped bodies with the fenders cut off. I like this one, the windows look kinda cartoon to me though.

Sent from my SM-N950U using Tapatalk
Quote:
Originally Posted by mewalsh100 (Post 5981144)
It’s ok overall - another option any way. The detail is lacking a bit and I don’t care for how they handled the rear, tail gate area. I think it could be made to look pretty good with some cutting, hacking and detailing though.
Cartoonish and lacking details describes a typical JConcepts body IMO. I've never seen them go 100% on a scale body. They seem to hit the 70% to 80% mark. There's always something that's "off" and they certainly don't have the details like the competition.

smog 12-03-2019 05:12 PM
Re: JConcepts Creep!!!!
 
Quote:
Originally Posted by JatoTheRipper (Post 5981104)
I'm not sure why, but I really like it and I had to order one. With the 20% off Cyber Monday coupon the body was under $30. Can't beat it.

Now to find that paint color...
Well done!

JatoTheRipper 12-03-2019 05:35 PM
Re: JConcepts Creep!!!!
 
Quote:
Originally Posted by smog (Post 5981152)
Well done!
Thank you! "thumbsup"

Hal 12-03-2019 07:10 PM
Re: JConcepts Creep!!!!
 
I would love to see this in a cab only. It would look good with a wrecker body on the back or an old school flatbed."thumbsup"

JatoTheRipper 12-03-2019 07:24 PM
Re: JConcepts Creep!!!!
 
Quote:
Originally Posted by Hal (Post 5981176)
I would love to see this in a cab only. It would look good with a wrecker body on the back or an old school flatbed."thumbsup"
The Proline Power Wagon is close and the cab is a separate from the bed.

rockhugger 12-03-2019 08:44 PM
Re: JConcepts Creep!!!!
 
one word... sounds like Truck,
.
.
Yuck!! that's it good guess audience!! ! :shock:

62PYRO 12-04-2019 12:28 PM
Re: JConcepts Creep!!!!
 
Disappointing how lacking the details are. Especially in the doors.

JatoTheRipper 12-04-2019 02:53 PM
Re: JConcepts Creep!!!!
 
Quote:
Originally Posted by 62PYRO (Post 5981326)
Disappointing how lacking the details are. Especially in the doors.
No body seams, especially around the doors like you mentioned, and poor grille decals are the biggest bummer for me.

distinctive pd 12-05-2019 01:14 AM
Re: JConcepts Creep!!!!
 
Quote:
Originally Posted by Frank211 (Post 5980949)



With a pair of scissors Would make for a cool sporty body"thumbsup"

Sneetches 12-05-2019 08:16 AM
Re: JConcepts Creep!!!!
 
I think it needs a 3d printed grill and bigger flat fenders for sure.

Jim85IROC 12-05-2019 03:08 PM
Re: JConcepts Creep!!!!
 
Quote:
Originally Posted by hobbyjumper (Post 5981593)
I do, actually...

Photo truck feature items –
The JCI Creep photo truck is an Element RC Enduro with removed floorboards. The JConcepts team added another battery tray (AE # #42003) to the rear to mount electrical and the receiver box. It’s important that the Creep body is either mounted high enough to clear side-guards or floorboards, or its necessary to remove them all together to meet the narrow width of the shell. The truck is fitted with JConcepts #3156-02 Landmines tires in green compound and mounted on #3389B Colt bead-lock wheels. The front bumper used is the Axial (#AX80125) with RC4wd front winch setup.
It's also possible to cut down the width of the floorboards and the rock sliders to accommodate narrower bodies. That's what I did to fit my Proline Jeep body to my Enduro.


All times are GMT -6. The time now is 11:42 AM.
Page 1 of 6 1 23456
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com