02-18-2020, 04:07 PM | #1 |
Rock Stacker Join Date: Oct 2019 Location: Saugerties
Posts: 84
| China crawler 1/2 cab
Has anyone ever bought one of these and get them to fit Sent from my GM1917 using Tapatalk |
Sponsored Links | |
02-18-2020, 04:09 PM | #2 |
Rock Stacker Join Date: Oct 2019 Location: Saugerties
Posts: 84
| Re: China crawler 1/2 cab
Forgot measurements Sent from my GM1917 using Tapatalk |
02-19-2020, 07:16 PM | #3 |
Newbie Join Date: Dec 2019 Location: Texarkana
Posts: 10
| Re: China crawler 1/2 cab
Yes I bought one... haven’t gotten it yet. Planning on making a Gen8 flatbed. I did learn something on a Jeep body I bought....won’t go over inner fenders. Tadaaa it will fit my Earthquake 3.5...with some mods. Sent from my iPhone using Tapatalk |
02-19-2020, 07:18 PM | #4 |
Newbie Join Date: Dec 2019 Location: Texarkana
Posts: 10
| Re: China crawler 1/2 cab
FWIW. This is the one I ordered... Sent from my iPhone using Tapatalk |
02-19-2020, 07:48 PM | #5 |
Rock Stacker Join Date: Oct 2019 Location: Saugerties
Posts: 84
| Re: China crawler 1/2 cab
Same one lol...not sure how it will fit by the wheel wells. Looks like I would have to not run a front bumper. Sent from my GM1917 using Tapatalk |
02-19-2020, 10:19 PM | #6 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,010
| Re: China crawler 1/2 cab |
02-20-2020, 07:48 PM | #7 |
Pebble Pounder Join Date: Aug 2019 Location: Redlands, CA
Posts: 194
| Re: China crawler 1/2 cab
Here ya go, mated to an Element Enduro bed. Cracks pretty easy without good bumper protection, but I don’t hate it. Rustoleum Troy-Bilt Red.
|
02-20-2020, 07:54 PM | #8 |
Rock Stacker Join Date: Oct 2019 Location: Saugerties
Posts: 84
| Re: China crawler 1/2 cab |
02-20-2020, 08:13 PM | #9 |
Pebble Pounder Join Date: Aug 2019 Location: Redlands, CA
Posts: 194
| Re: China crawler 1/2 cab
Not a real pretty job, that. The tires in that first pic are biggun Hyrax knock-offs. They might have needed less hacking with something smaller and Class 1-ish like the ones in the (lol) kind of gratuitous photos here. Sorry no side view, but you’ll see I had to trim real deep into the front quarter panel, almost to the bumper.
|
02-20-2020, 08:53 PM | #10 |
Rock Stacker Join Date: Oct 2019 Location: Saugerties
Posts: 84
| Re: China crawler 1/2 cab
Mine came in today and needs some major trimming. If I move it more forward the body posts are in the windshield and the electronics and transmission would hang 1/2 way out the rear of the cab. I looked at moving axile back but that would require me buying new links or cutting the ones I have. Sent from my GM1917 using Tapatalk |
02-20-2020, 09:07 PM | #11 |
Pebble Pounder Join Date: Aug 2019 Location: Redlands, CA
Posts: 194
| Re: China crawler 1/2 cab
Interesting. I didn’t have a “posts through the windshield” issue but there was a fair amount of trimming to clear the tranny, if I recall. Stakeside might be an issue because of that? It’ll be interesting to see how this works out for you. Maybe trimming the bottom back of the cab will let you move the cab just forward enough to fit posts? IDK, but yeah, I had to trim uncomfortably forward within the wheel wells. Dez really nailed it with the green body he used, and no trimming even with the big Traxxas tires. Super clean. Last edited by LincolnofDeath; 02-20-2020 at 09:10 PM. Reason: Props to Dez |
02-21-2020, 06:54 PM | #12 |
Rock Stacker Join Date: Oct 2019 Location: Saugerties
Posts: 84
| Re: China crawler 1/2 cab
Yeah he moved his body forward for the wheel wells to match and cut 1 1/2 off the rear frame Sent from my GM1917 using Tapatalk |
02-22-2020, 07:30 AM | #13 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: China crawler 1/2 cab
Are these bodies polycarbonate (Lexan) or some junk plastic like ABS?
|
China crawler 1/2 cab - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
my axial crawler in China | chester chen | Videos! | 2 | 02-02-2010 08:49 PM |
my berg crawler in China | chester chen | Videos! | 10 | 10-21-2009 11:43 PM |
| |