Mighty FC interior
 

Putting an Axial Mighty FC body on my Scx10vs4 stealth mutt and not sure what readily available interior would fit the body.
Going with an overland theme so I'm trying to avoid helmets inside.
I did search and didn't get anything. Also, not really looking to build one from styrene since I haven't starting working that skill set up.
Thank you.

Sent from my moto g(7) power using Tapatalk

Re: Mighty FC interior
 

Have you checked out the proline classic interior? https://www.rpphobby.com/product_p/pro349500.htm
It can be cut down.

How wide is it? I have one on hand if you have some dimensions

Re: Mighty FC interior
 

6 7/8 wide, 5 1/2 deep.
I just checked the Axial Cherokee and it's about 7 1/2 wide. Might be close enough.

Sent from my moto g(7) power using Tapatalk

Re: Mighty FC interior
 

Check out the interior from the UMG10.

Re: Mighty FC interior
 

My PL classic interior is trimmed down on the width to roughly 6 7/8", the door cards are thick and can be cut down (it comes at 7 3/4" wide). The depth starts off at 8 1/2" and I've cut mine down to 4 1/4" deep.

Re: Mighty FC interior
 

Another option I just found is the UMG10 interior. But no published dimensions.
Anyone know the width of the cab at the windshield?

Sent from my moto g(7) power using Tapatalk

Re: Mighty FC interior
 

I used the UMG10 one in my nukiser. I think I cut it down to around 7x5. That's a rough estimate.

Re: Mighty FC interior
 

Cool. Might be the ticket.
Thanks!

Sent from my moto g(7) power using Tapatalk