VS4-10 Pro Paint I've noticed with two-tone Pro paint jobs that if the top is a different color than the body then the lip that runs around the top section usually gets painted the same color as the top (but not always). I'm thinking that is probably the best way to do it, or just paint the top and the vertical supports the same color. That gets around the problem. Lol! Anyone thought about this? |
Re: VS4-10 Pro Paint You can do it either way. On my PRO I painted the whole top black on the outside. I mainly did it this way because I didn’t want to use the suppled window trim decals. https://uploads.tapatalk-cdn.com/202...da5ff00f1c.jpg Sent from my iPhone using Tapatalk |
Re: VS4-10 Pro Paint 1 Attachment(s) Attachment 401389 I thought the window lines were clean without anything. This was for my Ultra. I don't know why I'm making a big deal out of this - as soon as I get it dirty I won't care! |
Re: VS4-10 Pro Paint 2 Attachment(s) I did not wanted to use the decals either and my theme was a bit distressed and patina look. I masked the trim and painted with a dirty metal look. Here is my pro. |
Re: VS4-10 Pro Paint Quote:
Quote:
|
Re: VS4-10 Pro Paint Patina does look good and I like the window frames. Not sure I could pull that off though. Thanks for the flames comment - not my work - that's why they look good! Lol! |
All times are GMT -6. The time now is 05:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com