| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
06-29-2007, 06:25 AM
| #1 |
| Pebble Pounder Join Date: Jun 2007 Location: Slidell, LA
Posts: 154
|  What battery will fit in the stock GRC What battery will fit in the stock GRC? I have heard that it requires a special battery, and that the standard 6 cell stick packs do not fit. If this is true, then what battery pack is recommended. Please do not suggest Lipo's, I do not have the set up for those. Thanks. |
|  |
| Sponsored Links | |
| | |
|
06-29-2007, 07:49 AM
| #2 |
| Quarry Creeper Join Date: May 2006 Location: Pirkkala, Finland
Posts: 383
| You could install a standard 6 cell pack on top of the servo (on the axle to get some more weight) with velcro? Or you can buy 2/3 size cells which should fit to the batteryarea. I haven't tried, but I think that'd work. |
|
| |
|
06-29-2007, 09:33 AM
| #3 |
| Rock Crawler Join Date: Jan 2006 Location: Irritable Isle
Posts: 912
| www.unitedrc.com sells three packs that are designed to fit in the stock location. Like Tomik said, using a smaller battery on the servo will lower the CG for better crawling. |
|
| |
|
06-29-2007, 02:53 PM
| #4 |
| Newbie Join Date: Jun 2007 Location: Over There
Posts: 17
| This is not stock, but its real easy to do. Just mount the tranny backwards and extend the front plate out so the battery will lay flat. I did this so I counld use all them 6 cell battserys I have laying around. No since in having different batterys for all your toys  And a thanks to drc323 for the idea    Last edited by MudHead; 06-29-2007 at 02:55 PM. |
|
| |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
