|
| LinkBack | Thread Tools | Display Modes |
02-21-2017, 09:53 PM | #1 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| I bought a Associated Pro Rally
Just bought a nice used 1/10th Associated Pro Rally I was looking at a Associated Pro SC Truck roller, and the only difference between The Truck and Rally car, is the body's and the front and rear bumpers And I got a good deal on the Rally car, the Truck was more money cause there was no body or tires and wheels and electronics, the Rally Car needs a charged Lipo, and its good to go I can covert it too a short course truck in the future, if I get tired of the Rally car body Last edited by kgb424; 02-21-2017 at 09:57 PM. |
Sponsored Links | |
02-25-2017, 06:38 PM | #2 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
Here is how I found the Pro Rally as I pulled it out of the box There is a section in the drivers side rear corner where the previous owner Took a pair of scissors and cut body, all they did was make it worse and rip and tear more, plus it shifted during shipping and smash the corner even more I test drove the Rally and I got caught on a brush pile and spread open the passenger side of the body and it will not go back into form So the passenger side of the body doesn't cover the chassis, so the body is trash I found this Proto Form PFRX Rally Cross body that fits Pro Rally chassis But I can't paint or have the skills to evenly place stickers, so both sides match |
02-26-2017, 08:37 AM | #3 |
Rock Stacker Join Date: Oct 2014 Location: Indiana
Posts: 80
| Re: I bought a Associated Pro Rally |
02-26-2017, 09:45 AM | #4 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
Hey HoosierClod I really don't like the oversized Rally body, and if I bought the Proto Form Rally body, I would have to trim the body to be able use my 2.2''/3.0'' Trenchers and Bandlands and Street fighters and stock rear EXO tires And after looking at the short course truck bodies, I like the look lower profile and would not have to trim the fenders to use the Proline tires and wheels Can I ask due you break a lot of body mounts, I read the truck ones, break more than the Rally ones, maybe the oversized Rally body, deflects more of the impact I would like buy a Short Course Truck body and the set of SC front and rear bumpers and a set of the Sway bars sold for the Rally Put sway bars on my EXO and they help the stability at higher speeds, and they were cheap Last edited by kgb424; 02-26-2017 at 10:05 AM. |
02-26-2017, 04:28 PM | #5 |
Newbie Join Date: Nov 2016 Location: Kirkland
Posts: 10
| Re: I bought a Associated Pro Rally
A little shoe goo will do the trick on your cracked wheel well. Grab a drinking straw and put a blob on it. Roll the straw across the crack and let it cure overnight, it will be bonded very strong. You can paint black some lexan and weld a patch with the shoe goo as well and fill the gap. |
02-26-2017, 06:20 PM | #6 |
Rock Stacker Join Date: Oct 2014 Location: Indiana
Posts: 80
| Re: I bought a Associated Pro Rally |
02-26-2017, 07:07 PM | #7 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
Hey dshy I was going to use shoo goo and drywall lathing tape, and make some repairs, and was going fill in the missing body section Used some black duck tape and it filled it the missing section, and it doesn't look that bad for a temporally patch, so I could test drive the Pro Rally it would not get worse It did roll over and flip cause I pushed it a little, but after the passenger collision with a brush pile the whole right side of the body stretched and will not close back in towards the chassis like was before I hit the brush pile A stick went over the right front wheel and down the passenger side of the body and now there is a gap and it won't go back to form So I will just have to buy a lower profile truck body and call it good Last edited by kgb424; 02-26-2017 at 07:23 PM. |
02-27-2017, 10:20 AM | #8 |
Rock Stacker Join Date: Oct 2014 Location: Indiana
Posts: 80
| Re: I bought a Associated Pro Rally
You might try heating the body with a heat gun and see if it will go back in shape.
|
02-28-2017, 12:46 PM | #9 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
I like the Short Course Truck body better than oversized Rally body So I bought a stock painted one and set of the front and rear bumpers and with front and rear skid plates And a set of front and rear sway bars It going to have the Rally platform with a truck body Last edited by kgb424; 02-28-2017 at 12:48 PM. |
03-01-2017, 01:46 PM | #10 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
I also ordered a new 47t spur gear and the slipper pads for the clutch plates Already have 2 14t and a 16t 32p pinions, so I don't new to order a new pinion gear |
03-02-2017, 12:25 AM | #11 |
Newbie Join Date: Nov 2016 Location: Kirkland
Posts: 10
| Re: I bought a Associated Pro Rally
Nice work on those mounts, they look stout. The truck body will have more of a scale appearance to the exaggerated hatch any ways. What is the ride height of this?
|
03-03-2017, 10:01 AM | #12 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
I got my sway bars, installed they were pretty easy to install
Last edited by kgb424; 03-03-2017 at 10:07 AM. |
03-03-2017, 07:43 PM | #13 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
I got the body and rear bumper and mud flaps and I like the Truck body a lot more then I did the Rally Body I'm still waiting on the front bumper and spur gear and slipper pads |
03-03-2017, 07:45 PM | #14 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
And like how the red on the Proline Bead Locks pops, looks like a Racing Truck with the Street Fighters
|
03-04-2017, 11:03 AM | #15 |
Rock Stacker Join Date: Oct 2014 Location: Indiana
Posts: 80
| Re: I bought a Associated Pro Rally
Looks good. Do yourself a favor and reinforce the body to make it last. I didn't do mine and it got trashed quickly. The new body is lined inside with strapping tape to hopefully help the body survive.
|
03-04-2017, 10:11 PM | #16 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
I got the front bumper and dropped the body posts down so the there is no holes showing, I don't think I want to go any lower but I think I can go one more hole lower maybe The grill looks better with the body lowered, but I can still raise it the body up too run the Pro Line 2.2''/3.0'' Street Fighters and Trenchers and Band Lands I'm going to reinforce the inside of the body and if it rubs too much, I can raise the body up, so one hole shows on the posts Last edited by kgb424; 03-04-2017 at 10:14 PM. |
03-04-2017, 10:18 PM | #17 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
I also got the new 47 tooth spur gear and new slipper clutch pads, not sure if I want to tear it down to change the spur gear and pinon After I installed new bumpers and sway bars and got the new body and its looking good Last edited by kgb424; 03-04-2017 at 10:27 PM. |
05-29-2017, 09:06 AM | #18 |
Quarry Creeper Join Date: Aug 2014 Location: home
Posts: 392
| Re: I bought a Associated Pro Rally |
08-22-2017, 07:18 PM | #19 |
I wanna be Dave Join Date: Mar 2013 Location: Minden
Posts: 2,198
| Re: I bought a Associated Pro Rally
I found a set 2.2'' Proline Road Rages wheels and tires in my parts pile that come from my Nitro Traxxas days, they lower the truck quite a bit and clear the steering knuckles
Last edited by kgb424; 08-22-2017 at 07:21 PM. |
08-23-2017, 02:54 AM | #20 |
Quarry Creeper Join Date: Aug 2014 Location: home
Posts: 392
| Re: I bought a Associated Pro Rally
How does the sc900 perform? I see you've got the older version of the prosc/pro rally... Does it overheat a lot? Sent from my LGAS375 using Tapatalk |
I bought a Associated Pro Rally - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Losi Rally Pro 4 + Traxxas rally wheels | jeepgeek2002 | Rally | 1 | 01-05-2015 06:10 AM |
Bought a MRC pro!! | rockcrawler150 | Losi Mini-Rock Crawler | 13 | 07-17-2011 03:41 PM |
Just bought a MacBook Pro | srfrkyle1234 | Chit Chat | 15 | 06-14-2007 04:09 AM |
| |