FF-03 goes rally Here's my version of the FF-03 RR (Road and Rally) I have so much FF-03 spares that I'm able to build another car but set up in rally form. I only bought new set of 60mm shocks and cut some areas at the chassis which stops the droop and allowed the chassis to raise. Front ride height is 2.2cm and rear stand at 2.5cm. Used these hop-up parts I have: 54223 Aluminum Motor Plate 54234 Aluminum Spur Gear Mount 54235 Aluminum Racing Steering set 54258 FF-03 Carbon Rear Damper Stay 53823 Aluminum Wheel Hub 5mm 53993 TA-05-IFS Aluminum Rocker Arm Set 54495 RM-01 aluminum servo mount 84410 Carbon Steering Plate Carbon Reinforced bumper mount Carbon Reinforced Upper Arm Mount Carbon Reinforced Rear bulkhead Carbon fiber bumper support - DIY Carbon fiber rear deck stiffener - DIY Carbon fiber ESC tray - DIY Carbon fiber servo/RX tray - DIY Carbon fiber battery holder - Not sure what brand https://i.imgur.com/oz8At97h.jpg https://i.imgur.com/IeSOGSJh.jpg https://i.imgur.com/GjGCrsbh.jpg https://i.imgur.com/8PjJ8vDh.jpg https://i.imgur.com/afixL8mh.jpg With electronics https://i.imgur.com/MJlU0eVh.jpg https://i.imgur.com/9UvN3CIh.jpg With my FF-03 Pro-R (a heavily modified FF-03 Pro) https://i.imgur.com/NijspfYh.jpg https://i.imgur.com/2KXH9mJh.jpg https://i.imgur.com/9df1qxrh.jpg |
Re: FF-03 goes rally Very nice what bodies are you going to use. |
Re: FF-03 goes rally Quote:
Both bodies should be here in a few days. Can't wait to paint them |
Re: FF-03 goes rally Both chassis look great! The FF03 looks great even without a body imo. :) |
Re: FF-03 goes rally Quote:
I modified my Pro heavily. Changed/upgraded so many parts and still waiting for a few ones to arrive to complete my upgrade plan. So far, here it is... https://i.imgur.com/kUepGkgh.jpg https://i.imgur.com/RmAccnkh.jpg https://i.imgur.com/dIhtj8fh.jpg https://i.imgur.com/lZ4ah20h.jpg https://i.imgur.com/slU9nbTh.jpg Oh recently upgraded to Sanwa RX-482 (antenna-less) :) |
Re: FF-03 goes rally Beautiful cars! Nothing cooler than a mix of anodized aluminum and carbon fiber! |
Re: FF-03 goes rally Quote:
|
Re: FF-03 goes rally Yesterday's fun at the track... https://i.imgur.com/AiSHzNgh.jpg https://i.imgur.com/DvdGQohh.jpg https://i.imgur.com/sRUk8D9h.jpg https://i.imgur.com/RKUgtChh.jpg https://i.imgur.com/HioNZCTh.jpg https://i.imgur.com/uwOtiLsh.jpg I'm very, very impressed with my FF-03RR. It performed really well and would even surpass the XVs (There were 3 XV-01 I ran/raced with). |
Re: FF-03 goes rally Upgrade update... Tamiya: 54223 Aluminum Motor Plate 54234 Aluminum Spur Gear Mount 54235 Aluminum Racing Steering set 54258 FF-03 Carbon Rear Damper Stay 53823 Aluminum Wheel Hub 5mm 53993 TA-05-IFS Aluminum Rocker Arm Set 54495 RM-01 aluminum servo mount 84410 Carbon Steering Plate Carbon Reinforced bumper mount Carbon Reinforced Upper Arm Mount Carbon Reinforced Rear bulkhead Yeah Racing: DSG-0060BU - Aluminum threaded 60mm damper set FF03-013-01G - Graphite front bulkhead FF03-069BU - Aluminum Ball differential Joint set 3Racing: FF03--23/WO Graphite battery Plate Works1200 (DIY): W12- Carbon fiber bumper support - DIY W12- Carbon fiber rear deck stiffener - DIY W12- Carbon fiber ESC tray - DIY W12- Carbon fiber servo/RX tray - DIY https://i.imgur.com/Fqm8JQ4h.jpg https://i.imgur.com/LSszAt2h.jpg |
Re: FF-03 goes rally Joined rally race last Sunday. I didn't win any trophy but it was all fun. I finished 4th overall on the stock rally car class out of 16 cars. My car was the only FWD in the class, the rest were 4WD (XV-01, TT-02, TA-02, TA-03) https://i.imgur.com/2bc8VqZh.jpg https://i.imgur.com/n529zxJh.jpg https://i.imgur.com/RBB5MSYh.jpg https://i.imgur.com/yea847Th.jpg https://i.imgur.com/EKz5ItXh.jpg https://i.imgur.com/xvU89T4h.jpg https://i.imgur.com/XR601yPh.jpg The silver can motor is just too slow. The cars can't make the jump even when coming from a long stretch. I suggested to race with at least 23t or 21t next time. The organizers will discuss. |
Re: FF-03 goes rally Very cool pics - looks like a blast! Lots of cool rides on those tables. Someone raced rally with a TA03? Assuming it was a front motor TA03F since it's very similar/spiritual predecessor to the XV01 - how did the belt hold up? |
Re: FF-03 goes rally Quote:
Thanks! :) |
All times are GMT -6. The time now is 03:27 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com