Go Back   RCCrawler Forums > Miscellaneous > Rally
Loading

Notices

Thread: Unnamed rally car project (1/10)

Reply
 
LinkBack Thread Tools Display Modes
Old 10-15-2021, 03:23 AM   #1
Newbie
 
Join Date: Oct 2021
Location: Jönköping
Posts: 7
Default Unnamed rally car project (1/10)

So, decided to build a 1/10 rally car with a center differential and belts instead of shaft. Did some thinking and drawing and ended up with this. Based on a Xray XB4 high volume differential. Put the diff case in the lathe and removed the bottom. Made a new out of 6082-T6 aluminum. Used a diff cross pin from Xray X1 so the bevel gear axle could run through the differential. The concept worked.

Last edited by Karl_Hungus; 10-15-2021 at 03:29 AM.
Karl_Hungus is offline   Reply With Quote
Sponsored Links
Old 10-15-2021, 03:30 AM   #2
Newbie
 
Join Date: Oct 2021
Location: Jönköping
Posts: 7
Default Re: Unnamed rally car project (1/10)

First mockup.

Skickat från min AC2003 via Tapatalk
Karl_Hungus is offline   Reply With Quote
Old 10-15-2021, 03:32 AM   #3
Newbie
 
Join Date: Oct 2021
Location: Jönköping
Posts: 7
Default Re: Unnamed rally car project (1/10)

Version 4 of the differential since the first 3 wasn't long enough. Had to "make" a new spur since Xray don't have a 87T for their differentials, only for their slippers.

Skickat från min AC2003 via Tapatalk
Karl_Hungus is offline   Reply With Quote
Old 10-15-2021, 03:33 AM   #4
Newbie
 
Join Date: Oct 2021
Location: Jönköping
Posts: 7
Default Re: Unnamed rally car project (1/10)

First batch of belts came. So cool to be able to just make a phone call and order the belts you need for a fraction of the price Tamiya or any other brands charge and have them delivered 2 days later
Only problem is that I ordered too short rear belt

Skickat från min AC2003 via Tapatalk
Karl_Hungus is offline   Reply With Quote
Old 10-15-2021, 03:36 AM   #5
Newbie
 
Join Date: Oct 2021
Location: Jönköping
Posts: 7
Default Re: Unnamed rally car project (1/10)

Moving the servo to the Center of the car requires a new part for the steering. And since I can't buy what I need, I had to make one

New on the Old on the

Skickat från min AC2003 via Tapatalk
Karl_Hungus is offline   Reply With Quote
Old 10-15-2021, 03:40 AM   #6
Newbie
 
Join Date: Oct 2021
Location: Jönköping
Posts: 7
Default Re: Unnamed rally car project (1/10)

This is what it looks like today, it's too wide at the moment so I'll have to manufacture some differential mounts so I can use the XV-01 suspension mounts instead of the TA-06.
The differential will be mounted on the suspension mounts instead of the chassis to get the clearance needed for the XV-01 suspension arms.

Skickat från min AC2003 via Tapatalk
Karl_Hungus is offline   Reply With Quote
Old 10-15-2021, 12:07 PM   #7
I wanna be Dave
 
Join Date: Aug 2004
Location: central VT
Posts: 2,300
Default Re: Unnamed rally car project (1/10)

Wild man. Some out if the box thinking going on here.

Is the center diff still sealed?
meatmonkey is online now   Reply With Quote
Old 10-15-2021, 03:44 PM   #8
Newbie
 
Join Date: Oct 2021
Location: Jönköping
Posts: 7
Default Re: Unnamed rally car project (1/10)

Yes, sealed and filled ��
But I might have to make a fifth version, not entirely satisfied yet.
Karl_Hungus is offline   Reply With Quote
Old 05-17-2022, 01:12 AM   #9
Newbie
 
Join Date: Nov 2021
Location: Finland
Posts: 3
Default Re: Unnamed rally car project (1/10)

Just found this thread, very interesting project! What has happened to the car since the last post, is it completed? I would love to see and read more about this kind of car building.
Verskis is offline   Reply With Quote
Old 07-01-2022, 04:47 PM   #10
Rock Crawler
 
Join Date: Jun 2013
Location: Portugal
Posts: 506
Default Re: Unnamed rally car project (1/10)

Curious on how this will end
cooper_xl is offline   Reply With Quote
Old 10-03-2022, 10:07 AM   #11
I wanna be Dave
 
Join Date: Aug 2004
Location: central VT
Posts: 2,300
Default Re: Unnamed rally car project (1/10)

Me too.

Any updates?
meatmonkey is online now   Reply With Quote
Reply



Unnamed rally car project (1/10) - Similar Threads
Thread Thread Starter Forum Replies Last Post
Project Budget WarPig/Wife's Rig Unnamed CamposZac96x Axial SCX-10 10 01-23-2013 04:16 AM
New Traxxas Rally: 1/16th Rally Car Szczerba Chit Chat 20 10-05-2010 10:26 PM
1:6 build up, project unnamed scalecrawler General Crawlers 12 08-07-2007 10:23 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com