| |
05-13-2009, 06:17 PM
| #1 |
| RCC Addict   Join Date: Sep 2007 Location: Westland, MI
Posts: 1,523
|  Vader Bully comp rig Here is a build up of my Bully axled comp rig for 09' I started with a self made custom Delrin chassis.  Drilled and re-tapped a set of TCS bent links to 8-32 so I could use large Traxxas rod ends.    Then I got a set of Revo GTR shocks I'm using yellow springs in the front and greens in the rear.  I run a set of Eritex Delrin solids with Proline Chisels and stock foams. I run no wheel wieght.  I then made dig switch using Honeywell V15H22-CZ100A02-K 22 amp switches, and a Hitech HS-55 servo.  Here is the assembled chassis.  I run a JR z9100HVt steering servo.  I ran my first comp and did ok. I was out of practice and placed 7th.  Next comp was much better as I had gotten a lot of wheel time. Placed second.  I run Integy motors 55t front 45t rear 3s 1300 mah Mamba Max CC BEC My dig wiring.  Thanks for looking.  Last edited by hitman46mod; 05-15-2009 at 06:49 PM. |
|  |
| Sponsored Links | |
| | |
|
05-14-2009, 01:24 AM
| #2 |
| RCC Addict Join Date: Apr 2006 Location: On Da' Shelf
Posts: 1,255
| Great looking setup Nice work on the chassis  I really need to get some softer springs for my GTR shocks! What weight oil are you using? That is amazing to me that you don't run any added weight  I am running Eritex adjustable off-set wheels with Chisel's and Ace's Donuts with 8oz. front and 6oz rear added. Do you run breather holes in your wheels? Last edited by Xtant3150c; 05-14-2009 at 01:28 AM. |
|
| |
|
05-14-2009, 07:54 PM
| #3 |
| Rock Crawler Join Date: Aug 2008 Location: North Augusta
Posts: 727
| Did you make the climb in the last picture? |
|
| |
|
05-15-2009, 10:16 AM
| #4 |
| I like to #*&^ Join Date: Mar 2009 Location: sittin in the sky
Posts: 4,388
| prety damn sweet looks real good |
|
| |
|
05-15-2009, 06:31 PM
| #5 | |||
| RCC Addict Join Date: Sep 2007 Location: Westland, MI
Posts: 1,523
| Quote:
Quote:
 Quote:
 I have a vid of my AX-10 pulling a steep climb with no wheel weight. I'm of the school of thought that a light rig is a good rig. My bully rig only weighs 6.2 lbs. RTR. I use Delrin and stainless hardware keep the weight down.  Here is one of my favorites a 1 1/2 foot leap from rock to rock.  Last edited by hitman46mod; 05-15-2009 at 06:44 PM. | |||
|
| |
|
11-25-2009, 09:13 AM
| #6 |
| RCC Addict Join Date: Sep 2007 Location: Westland, MI
Posts: 1,523
| Reworked suspension and chassis. It like a slinky.          Last edited by hitman46mod; 01-10-2010 at 09:30 PM. |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
