Hoppa's B2DA I don't typically do build threads but with comp crawling going the way of our rights, I figured I'd do my part to help keep it alive. I'm swapping out my XR axles to try out something different. I was going to go back to berg's then I came across these b2's in the classifieds and jumped on them. Since I use to have a super bully my main concern with the b2's is the cvd's. The axles I picked up are new so I tore them down and replaced the bearings and used blue loctite on all the screws. The cvd's were very sloppy and there's a few places where daylight can be seen through the cases, not that big of a deal but not ideal. So far I'm satisfied with the b2's for what money I spent. Im 95% sure I can make wraith uni's work with the stock knuckles. I'm just saint on a few things before this can be verified. I'll be using my YTC Double Agent with Brood power. So it begins. http://i454.photobucket.com/albums/q...A2120FCB48.jpg |
Re: Hoppa's B2DA Links off of the xr. Puts me about 1/4" long so they need a lil fine tuning but she's comin along. http://i454.photobucket.com/albums/q...F2381F1DD8.jpg |
Re: Hoppa's B2DA I think you will enjoy these axles."thumbsup" |
Re: Hoppa's B2DA Nice, take a look at Rowdys build as he's running the same chassis. I look forward to your wraith uni mod. |
Re: Hoppa's B2DA Quote:
I'll have a similar build coming up soon. With the DA and all, just had another surprise rig that got in the way. Looks good so far and I'll be watching this one"thumbsup""thumbsup" |
Re: Hoppa's B2DA great stuff. can't wait to hear what folks get done with new axles. Good idea on the build thread. I can never get enough of them. |
Re: Hoppa's B2DA Thanks and I'll try and keep it updated. I decided to move the servo up flush with the bottom of the axle tube and over towards the case. I'm pretty sure this is nothing new but here's the start of it. The hacked stock servo mount and cut down a piece of delrin. http://i454.photobucket.com/albums/q...292EAFF866.jpg |
Re: Hoppa's B2DA I have been checking out these axles. I saw Rowdys broken CVD's. Looks like the weak link. I would be great if you got the Wraith universals to work. Good luck! Maybe the knuckles from Dlux might work? Matt |
Welcome to the REVOLUTION!!!!! |
Re: Hoppa's B2DA Looking good Josh. Looking forward to see where you go with this rig."thumbsup" |
Re: Hoppa's B2DA Quote:
There's a thread, I believe it's called Dlux Bully where I saw a pic of a Dlux knuckle on one side of a axle. I haven't been back to see if the guy made it work. |
Re: Hoppa's B2DA Quote:
It should be fun. More than likely I will go to San Diego and the High Desert.:mrgreen: |
Re: Hoppa's B2DA Glad to see you getting it done, great build. LMK when it's practice day I'll meet up with you. |
Re: Hoppa's B2DA Servo mount mods done. Here's a few pics. It's hard to see in the last pic but the servo is touching the axle tube mounting screws. http://i454.photobucket.com/albums/q...1F6F532311.jpg http://i454.photobucket.com/albums/q...6F17C398A7.jpg http://i454.photobucket.com/albums/q...C85E8010FB.jpg |
Re: Hoppa's B2DA |
Re: Hoppa's B2DA Quote:
|
Re: Hoppa's B2DA Quote:
|
Re: Hoppa's B2DA What he said"thumbsup". Looking bueno. J |
Re: Hoppa's B2DA Is part of the upper link mount cut away? In one of the pics it looks like it was notched out for the servo. If it is you had better buy an extra mount to carry along. I have already seen 2 of unmolested ones bend. |
Re: Hoppa's B2DA Quote:
Quote:
|
All times are GMT -6. The time now is 12:02 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com