|
| LinkBack | Thread Tools | Display Modes |
05-20-2016, 06:24 PM | #1 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| RC's Bully2 / SuDu 3D Build
Jumping ship and going RC4WD Bully's! Let's see what we can do with these sweet looking axles? I've been running XR axles for years and it's time for a change. Got the 1st of many packages to come n the mail today. As always RPP hobbies has great service and shipping. Thanks [/URL] [/URL] [/URL] [/URL] [/URL] |
Sponsored Links | |
05-20-2016, 06:32 PM | #2 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Made some lightweight beadlocks in both 3 hole and 6 hole for the front. They are made from 6061 aluminum, may try a some deferent material down the road. Hoping they do good with the voodoo pins form purpmart. [/URL] [/URL] [/URL] |
05-20-2016, 07:05 PM | #3 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Also made some carbon fiber upper link plates with delrin link mounts. Not sure how they are going to work, Crawlinghulls had some luck with the 1st prototypes. May make some changes. [/URL] |
05-20-2016, 07:21 PM | #4 |
Rock Crawler Join Date: May 2007 Location: Norwich
Posts: 920
| Re: RC's Bully2 / SuDu 3D Build
I think your on to something |
05-21-2016, 05:25 AM | #5 |
I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Re: RC's Bully2 / SuDu 3D Build
Great start....
|
05-21-2016, 10:37 AM | #6 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Can forget Robbob, Krazed Builds for the sweet C.F. Rims Along with B.C. Brian for the shift hubs. [/URL] [/URL] |
05-21-2016, 10:51 AM | #7 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Starting weight is 330g on the front axle and 270g no the back. Hoping to get these to drop some weight using Ti and Delrin. Can't wait to get machining, time to do some programming. [/URL] [/URL] [/URL] |
05-22-2016, 02:57 PM | #8 |
Rock Crawler Join Date: May 2007 Location: Norwich
Posts: 920
| Re: RC's Bully2 / SuDu 3D Build |
05-22-2016, 04:25 PM | #9 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build |
05-24-2016, 06:29 PM | #10 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Got another package in the mail today. SWEET, Dravtech Mounts look great and fast shipping! [/URL] [/URL] |
05-24-2016, 10:04 PM | #11 |
Rock Crawler Join Date: Dec 2010 Location: Ct.
Posts: 644
| Re: RC's Bully2 / SuDu 3D Build
Good looking stuff Carl! The Bully's are nice axles and you've got the skills to machine up some nice options for them!! Love the wheels too! |
05-25-2016, 03:47 PM | #12 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build |
05-25-2016, 05:51 PM | #13 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Got some sweet stuff in the mail today, thanks to RC4WD! 8 degree c's and knuckles upgraded bearing with some knuckle weights. Along with a little suprise gift! [/URL] |
05-25-2016, 06:04 PM | #14 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build Had some time to do some machining today, working on in tire wheel weights out of carbon fiber. Things are starting to take shape. Please understand I have a lot more work to do, but there's the start. Loaded in the vise. [/URL] Drilled all the holes Changed out to an aluminum fixture. Using the holes to hold the CF down [/URL] All cut, now just to unscrew all the bolts. [/URL] Got two halfs cut let's see what we can do with theses. [/URL] |
05-25-2016, 06:49 PM | #15 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Right now each side weights 14 grams [/URL] Put together they weight 40 grams right now. Hoping to put lighting hole in the CF, use aluminum hardware and maybe find a lighter cross support. [/URL] [/URL] Also going to be able to use them as a beadlocks system, just need to put some slots in the weight ring allowing the tire bead to squeeze thru. [/URL] [/URL] Next step I need to make the interface between the knuckle and the CF ring. Then the holder for some weights, Brass [/URL] Tungsten [/URL] Last edited by ROCKCRUISER; 05-25-2016 at 06:51 PM. Reason: Rewrite |
05-25-2016, 07:14 PM | #16 |
I wanna be Dave Join Date: Nov 2009 Location: Chico now
Posts: 2,384
| Re: RC's Bully2 / SuDu 3D Build
Try some Nylon standoffs, I've been using them on my D-lux beadlocks with no problems so far, they are half the weight of the aluminum ones.
|
05-25-2016, 08:30 PM | #17 | |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build Quote:
Going to wait until I get the weight holder made, may need to change the width. I had those AL ones from some CF rings / rims. | |
05-28-2016, 04:50 PM | #18 |
Newbie Join Date: Aug 2015 Location: North Stonington
Posts: 14
| Re: RC's Bully2 / SuDu 3D Build
Looking good! Might have to get me some one day.
|
05-29-2016, 06:38 AM | #19 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build |
06-01-2016, 05:06 PM | #20 |
Pebble Pounder Join Date: Mar 2008 Location: Wallingford, CT.
Posts: 142
| Re: RC's Bully2 / SuDu 3D Build
Ok the Carbon Fiber beadlock / internal wheel weight is coming along, right now I'm waiting on more CF to show. Try out the 1st one with some 3mm hardware and stand offs. Next I'll make some lightweight aluminum pems with 3mm ID thread & set the length of the 3mm aluminum screw to be flush with the inside CF ring. Probably use 7075 series Al to make them. [/URL] This is the CF interface between the knuckle and the weight holder. Just need to post a program and run it. [/URL] Working on the CF weight holder now. |
RC's Bully2 / SuDu 3D Build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dlux/sudu build | FLOKI-81 | EnRoute Berg | 162 | 06-17-2016 12:28 PM |
Hustler's Sudu Build | stankulas | Axial AX-10 Scorpion | 13 | 05-09-2015 07:11 PM |
Looper's Bully2 Build | Looper | RC4WD Bully | 19 | 10-10-2014 07:35 PM |
Papabash's Bully2 Build | papabash | RC4WD Bully | 54 | 05-16-2011 08:54 PM |
| |