Receiver help so im building a bully 2. im gonna be using a spektrum dx5 pro my question is what's the smallest spectrum receiver I can use that will handle what I need it to? (how many channel) electronics im gonna be running are as followed: dual Tekin bxr esc's 2 Tekin 30t handwound motors Tekin T-440 servo Castle Creations Bec 10amp (set to 6volts??) MaxAmps 860mah 3s 11.1v lipo thank you for taking a look |
Re: Receiver help With that setup you'll only need 1 aux channel for the 2nd ESC and 1 extra channel for the BEC. A 3 channel spekrtum receiver will provide the bare minimum as far as channels go. This will be the same size as the 2 and 5 channel version as they all use a similar sized board and the same case, they just add plugs/covers for the unused channels. If size is the main concern maybe pop it out of it case and waterproof it while you have access and if shorting it out is a concern wrap it in heatshrink. |
Re: Receiver help thank you |
All times are GMT -6. The time now is 04:13 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com