Zach's new RC4WD Trailfinder 2

[Just Zach]

Originally Posted by canadianbacon

You'll like those tires, I got them for my H2 and love them.

Good to hear. I was wondering because of the lugs being a little tighter packed but it sounds like they'll work well.

Originally Posted by ColquittCustom405

nice video! I like the tire/wheel combo. Paint looks cool too!

Thanks. I wish the tire/wheel combo was staying but the wheels are so inset that they make the tires rub the knuckles and I've finally ruined this set. I have another set of tires coming though and might try them on some other wheels.

[canadianbacon]

Originally Posted by Just Zach

Good to hear. I was wondering because of the lugs being a little tighter packed but it sounds like they'll work well.

Yea, they're a tighter tread than my Proline TSL's but the compound makes up the difference and then some.

[DISTURBIN' tha PEACE]

Originally Posted by Just Zach

I had a couple requests to see it with bigger tires so here you go. I have to say it looks good, really good.....

What rings are those?

[canadianbacon]

Originally Posted by DISTURBIN' tha PEACE

What rings are those?

Stock rings I think, the wheels just look to be painted.

Enduro 1.9" Internal Beadlock Wheels for HPI Mini Trophy Truck

[Just Zach]

Originally Posted by canadianbacon

Stock rings I think, the wheels just look to be painted.

Enduro 1.9" Internal Beadlock Wheels for HPI Mini Trophy Truck

That's exactly it.

[DISTURBIN' tha PEACE]

Ok thanks, thought you said it was the pro10's.

[Just Zach]

Originally Posted by DISTURBIN' tha PEACE

Ok thanks, thought you said it was the pro10's.

I have some Pro 10's on order, I'm sure that's where you got that

[Just Zach]

A little something showed up in the mail today.

[PinchFlat]

Hells Yeah!

[88gmchog]

Originally Posted by Just Zach

A little something showed up in the mail today.

total BA truck man. cant wait to see more

[505tj]

Love it with that shell!

[701 Technique]

topper looks great Is that the RC4WD topper?

[Just Zach]

Originally Posted by PinchFlat

Hells Yeah!

Jigga jigga what!

Originally Posted by 88gmchog

total BA truck man. cant wait to see more

Thanks. More to come. I'm waiting for a few more things for it. I need to have it ready to go by next weekend though for the UTRCRC event.

Originally Posted by 505tj

Love it with that shell!

Thanks, so do I

Originally Posted by 701 Technique

topper looks great Is that the RC4WD topper?

I wanted the RC4WD one, it seems a bit nicer but this is the Dinky RC one. I got it from RPP hobby. I ordered the Dinky interior too but I don't think I can make it work

[Boyd1980]

Looks to be dinky rc.

I can't wait till the release of this Truck!
Been on the wait list since it was put onto rc4wd's website.

[Just Zach]

Stuff coming the beginning of next week

Scale Bench Seat for Mojave Body

Hilux 4WD emblem set

Mickey Thompson 1.9 Baja MTZ Scale Tires

Pro10 1.9 Steel Stamped Beadlock Wheel (Black)

[Rckcrwlr]

Originally Posted by Just Zach

Stuff coming the beginning of next week

Scale Bench Seat for Mojave Body

Hilux 4WD emblem set

Mickey Thompson 1.9 Baja MTZ Scale Tires

Pro10 1.9 Steel Stamped Beadlock Wheel (Black)

Nice list...

[1BadJeepBruiser]

Originally Posted by Just Zach

I ordered the Dinky interior too but I don't think I can make it work

I did the same thing, the dinky kit requires that the floor board section be able to bolt to the 2 side cab holes. I cut mine all out and realized it would be a no go.

I think in order to put a floor in I am going to have to modify the shifting servo mounting and go to a micro servo. I already started looking into, I just need a few hours to do it.

I am going to cut the supplied posts down, slide the front post back and run a micro metal gear servo with a longer shifter rod. This will get the servo back under the Bruiser bench seat and will allow me to drop the floor down to the point where it will touch the top of the transmission. Still not as low as I'd like it but it should actually be spot to the amount of drop my OG clone had.

[Just Zach]

Originally Posted by 1BadJeepBruiser

I did the same thing, the dinky kit requires that the floor board section be able to bolt to the 2 side cab holes. I cut mine all out and realized it would be a no go.

I think in order to put a floor in I am going to have to modify the shifting servo mounting and go to a micro servo. I already started looking into, I just need a few hours to do it.

I am going to cut the supplied posts down, slide the front post back and run a micro metal gear servo with a longer shifter rod. This will get the servo back under the Bruiser bench seat and will allow me to drop the floor down to the point where it will touch the top of the transmission. Still not as low as I'd like it but it should actually be spot to the amount of drop my OG clone had.

I'll watch for pictures. I need to get something figured out.

[Rckcrwlr]

the bench seat eliminates the issue. The servo arm area is molded into the seat. I will be attaching a floor to the bottom front of the seat and then to where the dash bolts on. I hope...

[1BadJeepBruiser]

Originally Posted by Rckcrwlr

the bench seat eliminates the issue. The servo arm area is molded into the seat. I will be attaching a floor to the bottom front of the seat and then to where the dash bolts on. I hope...

Is the rc4wd bench seat different then the OG bruiser bench ? Because as of now my shifting servo horn and linkage is forward of where the end of the Bench seat is. I'll take some pics when I get out of work. I'm on 3-11 tours this week.