replacements for tf2 driveshafts I would like to replace the weak driveshafts on my tf2 but don't want to spend a lot of money will the Axial fit or traxxas driveshafts.live this truck but hate the driveshafts. |
Re: replacements for tf2 driveshafts traxxas maxx shafts. |
Re: replacements for tf2 driveshafts I am using junfac shafts on mine |
Re: replacements for tf2 driveshafts I just finished putting in a set of MIP,s Don,t think i,ll have to worry about them ever again"thumbsup" |
Re: replacements for tf2 driveshafts Which MIP version/part # fits the TF? |
Re: replacements for tf2 driveshafts Quote:
But in hindsight the set for the Axial Dingo would be better coz i,m pretty sure the rear shaft is already shorter |
Re: replacements for tf2 driveshafts Thanks guys I spent some money and bought the mip that are for all scx10 trucks,they fit perfectly,now this thing rocks!"thumbsup" |
Re: replacements for tf2 driveshafts another alternative is the Wild Boar shafts from Axial. I had a set laying around from my wraith, shortened them up and they are holding up fine, theyre designed to handle the torque of a 20 turn motor (kinda) so I figgure they'll be good to go for the drill motor I run in my TF2. much cheaper than MIPs or punishers......... |
Re: replacements for tf2 driveshafts Why not just run a ring on the plastic part of the joint? |
Re: replacements for tf2 driveshafts Quote:
|
Re: replacements for tf2 driveshafts Quote:
|
Re: replacements for tf2 driveshafts A local guy is running stock wraith driveshafts and they look good. Probably plenty beefy for the small tire trucks. |
Re: replacements for tf2 driveshafts Quote:
and then put some rings on the rear at the same time , couple of packs later it popped the rear even with rings , it was then i noticed just how twisted the shaft was:shock: In there Defence i,m running a 2500kv outrunner plus 1.9 Pro line Swampers , and i have given it a bit of a hard time :roll: |
Re: replacements for tf2 driveshafts ....I should have kept my yap shut...my tf2 wasnt complete yet...pulled the shafts from their bags yesterday and now I understand...they feel like rubber. |
I bought 2 of the shafts to try on my highlift, thinking they would be decent and twisted both within five minutes if running. Was quite disappointed in them and I was surprised to see them in the tf2. |
Re: replacements for tf2 driveshafts Quote:
|
Re: replacements for tf2 driveshafts Quote:
|
First run of my tf2 today and in 5min I had destroyed both front and rear drive shafts!! Kinda sucks to spend that much money for a kit and haft to buy parts right out of the gate! Mip's I guess it is. |
Re: replacements for tf2 driveshafts I ran 2 hours and never popped mine off, but I'm a pretty careful driver and only run 2S. |
Re: replacements for tf2 driveshafts ironic thing is after he snapped the drive shafts i snap my ankle bringing a spare rig to run for him...but i had fun and those stock drive shafts look like they would break if you look at them wrong and wont even make it outa the box when i get a tf2...mip shafts will be sourced first along with any other weak links to be found. i agree with many on the issues the tf2 has for the money you pay.but then again every new mousetrap has a few quirks to be found in the field while being ran. |
All times are GMT -6. The time now is 06:24 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com