|
| LinkBack | Thread Tools | Display Modes |
03-19-2014, 11:06 AM | #1 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Rolandrockshop's TF2 Build ..FINALLY!!
Finally got a TF2!! Thanks to JASON! Been wanting one since they cameout.. Gonna keep it 1.55 based. plans so far.. bob the bed steel sliders,bumpers interior roll bar lights anti wrap bar specs for electrics.. HH brxl wp HH30t CC BEC Hitec 5955tg servo 3s 2200mah lipo hitec 645mg servo for shifting axle upgrades.. helical gears Hd cvds/xvds .... Last edited by ROLANDROCKSHOP; 03-20-2014 at 09:25 AM. |
Sponsored Links | |
03-19-2014, 11:06 AM | #2 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
start by tearing down the transfer case and trans... greasing them up proper.. as you can see they were "lightly" greased from factory.. greased and reassembled.. onto framework!! . . Dad's ol'yota build body ive been itching to use again.. now it fits proper! 1st scale event/comp..LRC,Alabama..1st in 2.2 and 3rd in 1.9..both on xtrail chassis. Got me hooked on scalin!! Last edited by ROLANDROCKSHOP; 03-19-2014 at 09:01 PM. |
03-19-2014, 11:07 AM | #3 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
moved the shock hoops back.. and the shocks to backside of axles.. *stock location* relocated.. swapped frame mounts..shackles to the rear on front leafs.. an oring and washer to keep things quiet.. and over the leaf steering is now accepted. .. Last edited by ROLANDROCKSHOP; 03-19-2014 at 09:13 PM. |
03-19-2014, 11:08 AM | #4 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!! |
03-19-2014, 09:14 PM | #5 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
updated..
|
03-19-2014, 10:00 PM | #6 |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
The screws holding the leafs... take the screws thread them from the bottom and use locknuts on top. Tighten the nuts down and back them off 1/4 turn or so. It will help with the flex.
|
03-20-2014, 03:28 AM | #7 |
I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
Looking good...
|
03-20-2014, 06:12 AM | #8 | |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!! Quote:
Thank ya sir.. now if Rc4wd would just get restocked on what I need for the axles.. | |
03-20-2014, 06:22 AM | #9 |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
I been told to skip the red leafs. Try building your own leafs. Start collecting different sets and build one that works for your truck. Ultimately.. if you can track down chino63 military wrap springs those would be the best setup. Love the color and wheel & tire combo! Just needs scale hardware everywhere. Last edited by eric113; 03-20-2014 at 06:26 AM. |
03-20-2014, 08:34 AM | #10 |
RCC Addict Join Date: Feb 2012 Location: Ca.
Posts: 1,580
| Re: Rolandrockshop's TF2 Build ..FINALLY!! |
03-20-2014, 09:11 AM | #11 |
I joined the Band! Join Date: Aug 2009 Location: Maryville, Tn
Posts: 1,198
|
That makes 3 of us^^^^ Sent from my SCH-I545 using Tapatalk |
03-20-2014, 09:23 AM | #12 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
yep..gears and xvds..
|
03-21-2014, 06:05 AM | #13 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
I couldn't wait to get it rolling... so I used what electrics I had on hand till I get the elec on spec list. cc micro sidewinder / cc bec 6.3v Hpi X re 30t motor OmG 275oz servo for steering / 645mg shifter servo |
03-21-2014, 06:10 AM | #14 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
Outside in my Rc Orv test grounds.. Love it so far!! |
03-22-2014, 06:29 PM | #15 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
Took the TF2 out today to flex the springs... checking out a new crawl spot. the leafs take some getting used to.. the 2spd is just too nice,esc,motor never got warm or hot..cool. the 1.55 stompers aren't bad.. but.. I cant wait to get those 1.55 growlers on here. Just got to decide on beadlock..?? |
03-22-2014, 06:36 PM | #16 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
the new spot.. spent 3hrs and didn't cover half of it.. so many waterways and channels just right for crawlers. |
03-22-2014, 07:51 PM | #17 |
RCC Addict Join Date: Feb 2012 Location: Ca.
Posts: 1,580
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
Great looking spot, I wish I had some of that moss rock for my ongoing landscape project.
|
03-22-2014, 10:07 PM | #18 |
I wanna be Dave Join Date: Jun 2008 Location: Vermont
Posts: 2,016
| Re: Rolandrockshop's TF2 Build ..FINALLY!! |
03-23-2014, 09:01 AM | #19 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!! |
03-23-2014, 10:44 AM | #20 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Rolandrockshop's TF2 Build ..FINALLY!!
Got a DinkyRc yota interior coming for the TF2.. http://www.rccrawler.com/forum/dinky...interiors.html Gonna use the body I have now as a trail beater body. And fix up the Mojave body that came with for more scale details. |
Rolandrockshop's TF2 Build ..FINALLY!! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RolandRockshop's Monsta Truck build | ROLANDROCKSHOP | Mega/Monster Trucks | 73 | 08-29-2015 08:02 AM |
RolandRockshop's G6 JK | ROLANDROCKSHOP | Axial SCX-10 | 73 | 05-05-2015 08:39 AM |
Finally got a TF2 | juttsvw | RC4WD Trail Finder 2 | 23 | 05-24-2013 12:07 PM |
My TF2 is finally finished | fly_out_kid | 1.5 Scale Rigs | 0 | 10-21-2012 05:34 PM |
| |