Which driveshafts do you recommend?
 

I see Locked Up has their Devil RC shafts for sale, thought they might be a decent option. What is everyone using on their TF2's?

I bought an RTR and a Blazer body, as well as a set of K44's. The driveshafts are the next purchase. Thanks!

Re: Which driveshafts do you recommend?
 

I run primarily Punishers (not the v3) and Junfacs on my scalers. Both have held up well to quite a bit of abuse on various rigs.

Re: Which driveshafts do you recommend?
 

Same here, I use the RC4WD Punisher v2 shafts on my TF2. MIP is another option but I had a problem with those on my D110 Gelande II binding so I replaced them with Punishers. May not be an issue with the MIP shafts for the TF2.

Re: Which driveshafts do you recommend?
 

I run Punishers and never had any issues.

Re: Which driveshafts do you recommend?
 

Thanks guys. Mainly looking for something very scale. Hate the look of MIPs personally. What about the Mega Truck shaft?

Re: Which driveshafts do you recommend?
 

I run Junfac in my TF2 cuz there inexpensive

JunFac*Hardened*Universal...

Re: Which driveshafts do you recommend?
 

I seen people are using traxxas jato shafts also
i cannot verify but i believe all dingo shafts work.
Thats what i read but cant testify.

Re: Which driveshafts do you recommend?
 

i use the junfacs as well. if you knock the hard edges off the male shaft they work killer.

i run mips on everything but the tf2 i needed a smaller diameter shaft for clearance and to look less bulky.

Re: Which driveshafts do you recommend?
 

I've got the Punisher driveshafts on mine, they work great

Re: Which driveshafts do you recommend?
 

Thanks all. I ordered a set of Punisher shafts for it. Still would like to try the Mega Truck or ultra scale shafts someday. See how these hold up.

Re: Which driveshafts do you recommend?
 

Not exactly scale looking but I just put a set of the Axial Wildboar HDs on mine. I had to mix and match lengths and grind a bit off the end of the transfer case output shafts so the holes would line up, but that's it. If those shafts can handle my brushless SCX10s, they can handle the little 35t on my TF2.

Re: Which driveshafts do you recommend?
 

I use the SSD drive shafts they seam to hold up good