n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

A mysterious box appeared at my front door yesterday.
https://farm5.staticflickr.com/4470/...219b3e74_b.jpg

First, I did this.
https://farm5.staticflickr.com/4497/...9c5690cb_b.jpg

Then I did that.
https://farm5.staticflickr.com/4453/...e3484989_b.jpg

Followed by this.
https://farm5.staticflickr.com/4485/...57b09819_b.jpg

Then one of these.
https://farm5.staticflickr.com/4451/...860242bc_b.jpg

Watch this.
https://farm5.staticflickr.com/4483/...3f3c046d_b.jpg

There was something in there. Some upside down truck pictures. Let's get rid of that.
https://farm5.staticflickr.com/4511/...9f7160c9_b.jpg

THAT'S a quality box.
https://farm5.staticflickr.com/4465/...35d60d3c_b.jpg

Kitty house complete. Thank you.
https://farm5.staticflickr.com/4488/...52700f5c_b.jpg

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Well, since the cat is occupying the box I ordered I'll take a look at this picture box. It has trucks on it and I think trucks are neat.

This box is loaded with features! Really.
https://farm5.staticflickr.com/4470/...01aa34ef_b.jpg

https://farm5.staticflickr.com/4509/...b763a0d1_b.jpg

https://farm5.staticflickr.com/4451/...bc4cbfd6_b.jpg

https://farm5.staticflickr.com/4460/...d66bdf15_b.jpg

Please enjoy some slightly out of focus pictures of this truck on my bench.
https://farm5.staticflickr.com/4512/...72b23350_b.jpg

New two piece grille. Check that detail!
https://farm5.staticflickr.com/4469/...9d1b7028_b.jpg

Roll bar
https://farm5.staticflickr.com/4463/...9940c0b0_b.jpg

New bobbed bed
https://farm5.staticflickr.com/4486/...f1a1c340_b.jpg

Ready to run
https://farm5.staticflickr.com/4505/...73b9688f_b.jpg

Bag of goodies
https://farm5.staticflickr.com/4448/...bf31fa1d_b.jpg

STICKEREZZXZZX!
https://farm5.staticflickr.com/4453/...39075ac9_b.jpg

NiMh battery because RTR. And probably an easier battery for shipping, yeah?
https://farm5.staticflickr.com/4507/...775b04bc_b.jpg

But that's ok, the ESC works with 2S and 3S batteries too.
https://farm5.staticflickr.com/4507/...775b04bc_b.jpg


So if you haven't noticed, this isn't a typical RTR TF2. Obviously it's a replica of Marlin's Crawler but it also has some performance upgrades. Yota 2 axles, new transfer case skid plate, metal front bumper, bobbed bed, 1.7 IROK tires.


Stay tuned for outdoor pictures and video!

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

First run of the truck. Box stock with exception of a 4000 mah 3S instead of the stick pack.
https://farm5.staticflickr.com/4491/...fe70435d_b.jpg

https://farm5.staticflickr.com/4493/...c71e1084_b.jpg

https://farm5.staticflickr.com/4489/...0aec9095_b.jpg

https://farm5.staticflickr.com/4488/...7ab32216_b.jpg

https://farm5.staticflickr.com/4506/...a6f6e443_b.jpg

https://farm5.staticflickr.com/4507/...1725a086_b.jpg

https://farm5.staticflickr.com/4494/...345660ba_b.jpg

https://farm5.staticflickr.com/4498/...c4a22b45_b.jpg


Very successful first run! I ran out of daylight before I could get any good video. The tires hooked up well. I haven't used these 1.7 IROKs before but they are nice and soft. They do rub at full stuff but the real truck has the front fenders cut so that can be done. The bobbed bed helps greatly with departure angle and the front bumper actually has a pretty good approach. There is room to move it one more hole by the way. The suspension was a little stiff but there is room to tune it. I took out the internal springs from the shocks and removed the small helper before the next run.

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

This is badass. I'm on the wait list for this one. I got the email yesterday, saying it is coming soon. Can't wait till I get the email, saying it's in stock and ready to ship.

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

So, the front bumper is metal, rear bumper and sliders are plastic?

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Correct. Front bumper is metal with a metal mount.









Second trail run. I removed the springs from the shocks and took out the small helper. Major improvement. Feels like the springs softened up a bit by the end of the bash session. I also threw in a bench seat (not included) so Creepy Uncle Albert could drive. I don't like shooting video of trucks without drivers.

https://farm5.staticflickr.com/4445/...2b2f8ed0_b.jpg

https://farm5.staticflickr.com/4445/...1342bb93_b.jpg

https://farm5.staticflickr.com/4481/...9ea3f140_b.jpg

https://farm5.staticflickr.com/4498/...118fd7d2_b.jpg

https://farm5.staticflickr.com/4470/...43d92415_b.jpg

Pulled the Class 2 line at Smiggin's
https://farm5.staticflickr.com/4500/...3179a0f7_b.jpg


https://farm5.staticflickr.com/4475/...00d4d3ae_b.jpg

Undercarriage after 2 runs. No bent springs!
https://farm5.staticflickr.com/4449/...06ce34ef_b.jpg

https://farm5.staticflickr.com/4482/...090fe4ed_b.jpg

New skid plate and drive shafts.
https://farm5.staticflickr.com/4443/...22e0d2ed_b.jpg

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

This is awesome! Thanks for sharing n00b! Just when I thought I didn't need any more TF2's...damn you, RC4WD.

no00b, if you're not using those pretty Marlin Crawler stickers, I know someone who will!!! :lmao:

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Looks awesome! Just Pre-ordered mine, can't wait!

Sent from my LG-LS777 using Tapatalk

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Your scale town and trails are amazing as are your photos! "thumbsup"

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Any difference between those axles and the ones one the regular and lwb TF2 kits?

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

I've been noticing that the pumpkin on the front axle is offset...but isn't it offset to the wrong side??

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

These are Yota 2 axles. Behind the axle steering and better turning radius.

Good to hear! I think these will be hard to keep in stock.

You can never have too many RCs, no matter what they are.

Oh I'll be using them. I want to paint the body red first. Molded in color is fine by if you know me I like to take it too far.

Cheers!

It is on the correct side. Factory solid front axle Toyotas always on right side.


Video!

https://youtu.be/dPI0FlUBcFI

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Any idea when these are expected to start shipping?

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Amazing pal... Very nice scale trail you have there... One of the best I've seen!
As for the truck, can't wait to have mine... Should be here Friday...
Will run it stock for now but winter is coming and who says winter, says build and mods... ;)

Envoyé de mon LG-H873 en utilisant Tapatalk

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

I'm unsure, sorry.
Thanks! I see yours has arrived! Hope you're enjoying it as much I as I am.



I tore the body apart, painted it red and reassembled. End result. A red truck that is now red. The decals are from the sheet that was included with the truck. You may also notice I added a winch, AISIN hubs, inner fenders and a radiator core support. The truck is pretty much ready for running as my class 1 next year. That was easy!
https://farm5.staticflickr.com/4483/...5cbda4e3_b.jpg

https://farm5.staticflickr.com/4502/...e8e443a4_b.jpg

Sprayed the bed with liner, bed liner.
https://farm5.staticflickr.com/4445/...7503bb26_b.jpg

I replaced shackle mounts with the ones from BowHouse RC. They move the shackle back ever so slightly so it doesn't lock on full compression. Cheap, easy and useful. Like myself.
https://farm5.staticflickr.com/4468/...69b99189_b.jpg

https://farm5.staticflickr.com/4507/...5721a8f9_b.jpg

After a very rocky run today we're still in good shape
https://farm5.staticflickr.com/4477/...5cc60fe2_b.jpg

https://farm5.staticflickr.com/4502/...d2c23368_b.jpg

https://farm5.staticflickr.com/4507/...0b92844b_b.jpg

https://farm5.staticflickr.com/4471/...0677ca25_b.jpg

https://farm5.staticflickr.com/4446/...70195379_b.jpg

https://farm5.staticflickr.com/4498/...e74c66e6_b.jpg

I also recorded some video. I'll have that posted in a day or two.

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Where's the "Shocker" sticker? Was that not included?

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

I stuck it on my PT Cruiser.

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

The bed looks bobbed to me if so does it come that way

Sent from my SM-G950U using Tapatalk

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Correct, the bed comes bobbed.

Re: n00b "builds" a Marlin Crawler Edition Trail Finder 2
 

Nice thanks for the fast reply

Sent from my SM-G950U using Tapatalk