RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   RC4WD Trail Finder 2 (http://www.rccrawler.com/forum/rc4wd-trail-finder-2/)
-   -   Kincer's 4Runner Marlin build (http://www.rccrawler.com/forum/rc4wd-trail-finder-2/612076-kincers-4runner-marlin-build.html)

Levi 10-03-2019 08:02 PM

Re: Kincer's 4Runner Marlin build
 
Looks great. Keep it up. Theses tf kits are fun to build, fun to drive to. Makes me want to do a 4runner kit now.

kincer 10-03-2019 08:19 PM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by Levi (Post 5967260)
Looks great. Keep it up. Theses tf kits are fun to build, fun to drive to. Makes me want to do a 4runner kit now.

Thank you! I totally recommend this body kit, I didn't have a problem with anything fitting except two screws for the tailgate hinge had to shimmed a little to align tailgate.

lkvisser 10-04-2019 04:50 AM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by kincer (Post 5967130)
Thank you! Haven't even got to the suspension yet, on my to do list for sure.



Not sure if youíre going for trail truck or shelf truck..., I just did the shackle reverse (rc4wd), wish I didnít. They are hang up heavy..., might as well go crawling with a snow plow on the front;)


Sent from my iPhone using Tapatalk

kincer 10-04-2019 05:01 AM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by lkvisser (Post 5967329)
Not sure if youíre going for trail truck or shelf truck..., I just did the shackle reverse (rc4wd), wish I didnít. They are hang up heavy..., might as well go crawling with a snow plow on the front;)


Sent from my iPhone using Tapatalk

It's going to be a trail truck, I was planning on trying the A&M Garage shackle reversal kit. Good to know about the RC4wd setup. Thanks

kincer 10-04-2019 07:49 AM

Re: Kincer's 4Runner Marlin build
 
Got my wiring all done for now til I add accessories, but that's later down the road.https://uploads.tapatalk-cdn.com/201...b2430a02a4.jpg

AnimalHippie 10-04-2019 01:03 PM

Re: Kincer's 4Runner Marlin build
 
This thing is awesome Dave! I really like it! That body is looking great! Keep up the great work!"thumbsup"

kincer 10-04-2019 02:25 PM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by AnimalHippie (Post 5967455)
This thing is awesome Dave! I really like it! That body is looking great! Keep up the great work!"thumbsup"

Thank you! It's been a rough year for me and this build has given me some much needed therapy and renewed my RC bug. I've forced myself to take my time with this instead of hurrying and half assing things [emoji38]. Plenty of things to do yet but since my plant was shut down and I was forced into early semi retirement I'll have plenty of time while I look for work.

AnimalHippie 10-04-2019 02:31 PM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by kincer (Post 5967476)
Thank you! It's been a rough year for me and this build has given me some much needed therapy and renewed my RC bug. I've forced myself to take my time with this instead of hurrying and half assing things [emoji38]. Plenty of things to do yet but since my plant was shut down and I was forced into early semi retirement I'll have plenty of time while I look for work.



It's definitely good to have you back around! No half assing! LoL! Need to motivate Mark to get out and do some crawling. I'm too far away, but you're local enough to do it. Can't wait to see this thing and your other rigs back out on the rocks!


Sent from my iPhone using Tapatalk

kincer 10-04-2019 03:36 PM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by AnimalHippie (Post 5967477)
It's definitely good to have you back around! No half assing! LoL! Need to motivate Mark to get out and do some crawling. I'm too far away, but you're local enough to do it. Can't wait to see this thing and your other rigs back out on the rocks!


Sent from my iPhone using Tapatalk

I actually just finally met Mark last weekend when I bought his XJ TRX which is now a Blazer lol, definitely gonna have to do some trailing for sure!

kincer 10-08-2019 07:49 AM

Re: Kincer's 4Runner Marlin build
 
I installed a few other goodies yesterday on the 4Runner, RC4WD tube bumper with a winch, RC4WD sliders, and SSD front and rear hubs. I also have the RC4WD rear tube bumper but take note for anyone doing a 4Runner on a Marlin TF2 the chassis in the rear is different than standard TF2 so you will have to make a custom cross member to install the rear tube bumper. That's gonna wait for a bit til I decide exactly how I'm gonna do it.https://uploads.tapatalk-cdn.com/201...179ad2d2be.jpghttps://uploads.tapatalk-cdn.com/201...5eab145835.jpghttps://uploads.tapatalk-cdn.com/201...e97560b950.jpghttps://uploads.tapatalk-cdn.com/201...afd8c16c49.jpg

kincer 10-09-2019 05:34 AM

Re: Kincer's 4Runner Marlin build
 
Well later in the day after some thought and some grinding I was able to move the furthest rear cross member to where the old bumper mount was so that gave me the holes to mount the bumper but that made the bumper sit away from the body about 8mm to far, so I drilled 2 new mounting holes in the bumper 8mm away from the existing holes. This resulted in a nice close fit for the bumper. Took a little thought but worked out well. This is not needed on the standard TF2 chassis. https://uploads.tapatalk-cdn.com/201...cf17d2fbea.jpghttps://uploads.tapatalk-cdn.com/201...9bcf5e89a8.jpghttps://uploads.tapatalk-cdn.com/201...aa84595ee3.jpg

TAT76 10-09-2019 04:42 PM

Re: Kincer's 4Runner Marlin build
 
Rig is looking really good! love the bumper winch. Hows it wheel?

kincer 10-09-2019 05:03 PM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by TAT76 (Post 5968743)
Rig is looking really good! love the bumper winch. Hows it wheel?

It actually doesn't do too bad for still being stock suspension wise, will be doing the chino mod and o-ring mod now that I have the body about done. The weight of everything really makes it wheel realistic.

ternandbern 10-16-2019 10:44 AM

Re: Kincer's 4Runner Marlin build
 
Looks good. Love me some 4runner!

kincer 10-16-2019 10:47 AM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by ternandbern (Post 5970618)
Looks good. Love me some 4runner!

Thanks man! Love this rig!

toy4crawlin 03-01-2020 12:05 AM

Re: Kincer's 4Runner Marlin build
 
cool scaler.
where is the dash from?
I'd like to finish my 4runner interior

kincer 03-01-2020 06:15 AM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by toy4crawlin (Post 6001693)
cool scaler.
where is the dash from?
I'd like to finish my 4runner interior

Dash comes in the 4Runner body kit but I believe you can get certain parts of the interior separate. Check on RPP or RC4wd sites

toy4crawlin 03-22-2020 01:43 AM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by kincer (Post 6001707)
Dash comes in the 4Runner body kit but I believe you can get certain parts of the interior separate. Check on RPP or RC4wd sites

Thanks. rc4wd says the dash os a wopping 7.5 inches wide.
holy cow! i thought it was 1/10 scale
Is it really 7.5" ?

my 4runner body can only fit 6" dash

kincer 03-22-2020 05:26 AM

Re: Kincer's 4Runner Marlin build
 
Quote:

Originally Posted by toy4crawlin (Post 6006404)
Thanks. rc4wd says the dash os a wopping 7.5 inches wide.
holy cow! i thought it was 1/10 scale
Is it really 7.5" ?

my 4runner body can only fit 6" dash

What body are you trying to put this in? This is made for the RC4WD 4Runner body which is what I have.

JatoTheRipper 03-22-2020 06:31 AM

Re: Kincer's 4Runner Marlin build
 
Looks great! The little bit of grey paint on the interior made it look so much better.


All times are GMT -6. The time now is 12:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com