BTA Shock and servo winch questions
 

Ok y’all, I got a Marlin finally. STILL waiting on parts from rc4wd to fix the bf Goodrich but hey, this gets me crawling


Anywho, I decided to do some of the basic mods including the behind the axle shock mount and relocate the shock hoop.

The issue I’m running into is that everyone and all the pics I see show the shock standing vertical, and mine seems to lean back a bit at the top. Pic attached of it


Secondly, I’d like to run a servo winch on here, I’ve seen some people run a servo winch. I’d like to but I can’t seem to find an idiots guide to making that happen

Thanks!https://uploads.tapatalk-cdn.com/202...ceecfe47f3.jpg

Re: BTA Shock and servo winch questions
 

For the shocks you'll need a longer spacer on the lower shock to make it work.

For the servo winch I've seen it mounted where you would mount a servo for the 2 speed shift servo along south brake tubing flared st each end running from the servo close to the front to guide the route and prevent chafing. I can't seen too fond thre video I saw. I'll post it if I find it.

Im sure someone else will also chime in.

Sent from my SM-N950U using Tapatalk