Bobbed bed tips? Getting ready to finish my TF2 LWB 4 door and want to bob the end of the bed. Seems pretty straight forward. Any tips? Thanks! |
Re: Bobbed bed tips? Here's how i do mine in a few pics. Started by marking the cut with masking tape then screwing the bed to a piece of wood and clamping it in the vice. I then us a hacksaw with a fine (32tpi) blade and carefully go across the bed to get a even cut. This then makes the re-joining cleaner. https://i.imgur.com/asi6YZ2.jpg Here's the result after about 15 minutes of slow cutting: https://i.imgur.com/IKMgrhh.jpg I then used a bottle on MEKK to rejoin the bed using the piece i cut out. This give a bond the same strength as the original plastic. However, it's a slow process as I let each joint dry over night to get to full strength. https://i.imgur.com/pb9jMMt.jpg https://i.imgur.com/Rqc2KfP.jpg https://i.imgur.com/oFZ74zO.jpg https://i.imgur.com/EUYxi5g.jpg https://i.imgur.com/uSxKXUi.jpg I'm sure there are other methods but that's how I do mine. Hope this helps you a little. |
Re: Bobbed bed tips? Great! Thanks for the reply. I really like screwing the bed to wood and taking your time. Looks awesome! Thanks for the tip. I’m ready to give it a try. |
Re: Bobbed bed tips? Quote:
|
Re: Bobbed bed tips? Quote:
I've been thinking about doing the bob and wasn't sure where to start. Thanks for sharing the info! |
Re: Bobbed bed tips? I know it's going to take the fun and creativity out of the mix, but the Marlin bed is already bobbed and it's priced fairly reasonable. Save a bunch of time. https://store.rc4wd.com/RC4WD-Mojave...ed_p_7061.html https://uploads.tapatalk-cdn.com/202...e5f930d70c.jpg |
Re: Bobbed bed tips? Quote:
|
Re: Bobbed bed tips? I considered the Marlin bed myself, until I realized the same. The wheelbase doesn't match up with the LWB chassis. |
Re: Bobbed bed tips? I just bought the Toyota Xtra Cab, just to find out that it is for the LWB. I only have the normal Trailfinder 2. Will the Marlin bed fit the Xtra Cab and fit my wheelbase at 287mm? |
Re: Bobbed bed tips? Quote:
|
Re: Bobbed bed tips? Quote:
Or you could slice and dice the cab and bed to make it fit....bed will prolly be very short. |
Re: Bobbed bed tips? If you're using MEK, try Plastruct Plastic Weld. Shit's the bomb. |
Re: Bobbed bed tips? Acetone works great and easy to mix slurry of the same plastic as filler/bonder. |
All times are GMT -6. The time now is 11:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com