| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
10-20-2006, 12:41 AM
| #1 |
| I wanna be Dave Join Date: Sep 2004 Location: SF Bay Area
Posts: 3,417
|  Spool Gear and Transmission for TLT-1 Preview RC4WD Tracgear Spool Gear for TLT-1  The Tracgear for TLT-1 will start shipping mid next week, price is $34.99. R2 is a smaller version of our current R1 transmission. It is designed for TLT-1 size trucks:  R2 gear ratio is 11:1 to 30:1, R2 target price will be around $70 and we expect to ship in November. Last edited by rc4wd; 10-20-2006 at 12:53 AM. |
|  |
| Sponsored Links | |
| | |
|
10-20-2006, 12:53 AM
| #2 |
| RCC Addict Join Date: Jan 2005 Location: Green River Kentucky
Posts: 1,069
| I want 2 of the gears and 1 of the trannys asap.  |
|
| |
|
10-20-2006, 12:54 AM
| #3 |
| I wanna be Dave Join Date: Sep 2004 Location: SF Bay Area
Posts: 3,417
| We are taking pre-orders for the Tracgear TLT-1 already. In terms of transmission, we should have the prototype done next week, hopefully we can rush and get this out as fast as possible. Last edited by rc4wd; 10-20-2006 at 12:59 AM. |
|
| |
|
10-20-2006, 01:16 AM
| #4 |
| RCC Addict Join Date: Jan 2005 Location: Green River Kentucky
Posts: 1,069
| One last question are the tlt tracgears aluminum or steel? |
|
| |
|
10-20-2006, 01:17 AM
| #5 |
| I wanna be Dave Join Date: Sep 2004 Location: SF Bay Area
Posts: 3,417
| Aluminum. But all gears in R2 are steel. |
|
| |
|
10-20-2006, 01:21 AM
| #6 |
| RCC Addict Join Date: Jan 2005 Location: Green River Kentucky
Posts: 1,069
| Cant wait to get these thanks for all your help. |
|
| |
|
10-20-2006, 05:28 AM
| #7 |
| RC4WD Team Mgr/W.Pa.C.   Join Date: Nov 2005 Location: Here
Posts: 4,456
| Mike, You're killing me. All these great products are putting a strain on my wallet. Keep them coming. If you don't get it, my wife will. John |
|
| |
|
10-20-2006, 11:53 AM
| #8 |
| Web Wheeling  Join Date: Jan 2005 Location: Twin Cities
Posts: 2,837
| Any idea on the size of this tranny? Might work in my scale project that I have started... I need something small and this would same me some work. |
| |
|
10-20-2006, 12:00 PM
| #9 |
| Rock Stacker Join Date: Oct 2006 Location: SO CAL, California
Posts: 72
| Mike you're one the reasons why I'm in this hobby. |
|
| |
|
10-20-2006, 12:00 PM
| #10 |
| I wanna be Dave Join Date: Sep 2004 Location: SF Bay Area
Posts: 3,417
| Since the prototype is not out yet, the specs might change. (But I will have a final specs by late next week, when the prototype is done) 45mm (1.77") x 20mm (0.78") x 70mm (2.75") Also to avoid the shaft hitting the motor, the production version will have a longer shaft on the side where the motor is mounted. Also we expect to start shipping steel Punisher Shaft for TLT-1, TXT-1, Custom Trucks, X-Factor late next week. |
|
| |
|
10-20-2006, 12:04 PM
| #11 |
| Web Wheeling Join Date: Jan 2005 Location: Twin Cities
Posts: 2,837
| I think that will work for my truck... I would not need the shaft on the motor side though :-P So I will just be cutting the shaft off that side most likely. |
|
| |
|
10-20-2006, 12:05 PM
| #12 |
| I wanna be Dave Join Date: Sep 2004 Location: SF Bay Area
Posts: 3,417
| It is steel, but it can be done... |
|
| |
|
10-20-2006, 12:11 PM
| #13 |
| Web Wheeling Join Date: Jan 2005 Location: Twin Cities
Posts: 2,837
| Any chance of getting one of the prototypes with a shorter shaft, since I will not need the longer one? |
|
| |
|
10-20-2006, 02:16 PM
| #14 |
| RCC Addict Join Date: Jun 2006 Location: Nor Cal
Posts: 1,136
| any chance you guys could make both gears inside the axle from steel |
|
| |
|
10-21-2006, 12:08 AM
| #15 | |
| Gold Star Baby!   Join Date: Jun 2005 Location: In Kahoots!!!!!
Posts: 4,761
| Quote:
Is the 34.99 for 2? or is it 34.99 per axle? | |
|
| |
|
10-21-2006, 12:21 AM
| #16 |
| I wanna be Dave Join Date: Apr 2006 Location: FLAGSTAFF
Posts: 3,729
| single speed tranny or 2 speed, |
|
| |
|
10-21-2006, 12:29 AM
| #17 |
| I wanna be Dave Join Date: Sep 2004 Location: SF Bay Area
Posts: 3,417
| Etype R, you sure? Maybe we can make the shaft half length. Our gaol is make one version fit all if possible. And I will check with our engineers tomorrow to see if they can make make two shaft, so people can swap them self. GulaVW69, the TLT-1 stock one are not strong enough? DISTURBIN' tha PEACE, it's $34.99 for one. rockwerks, single speed. We will ship the locker by Tuesday. For those who really want one, please place your order now. It might get sold out very quickly, next patch will take another 1 1/2 weeks to get done. We will start taking pre-orders for the transmission next weekend (as soon as we post the prototype pics online), we expect to ship 2nd week of November. Price will be $69.99. Last edited by rc4wd; 10-21-2006 at 12:32 AM. |
|
| |
|
10-21-2006, 12:46 AM
| #18 |
| I wanna be Dave Join Date: Sep 2004 Location: SF Bay Area
Posts: 3,417
| 2 questions for you guys, is the gear ratio ok? 11:1 to 30:1 And what is the gear ratio on that stampede tranny? |
|
| |
|
10-21-2006, 04:37 AM
| #19 |
| RCC Addict Join Date: Jun 2006 Location: Nor Cal
Posts: 1,136
| No the stock tlt is not strong enough if you were to use it on say a faster motor or non crawler application like a pre runner. How much of a price difference would there be? |
|
| |
|
10-21-2006, 05:35 AM
| #20 |
| ... Join Date: Sep 2005 Location: USA
Posts: 11,243
| Nice price on the Tranny. It's hard just getting a Pede, losi or stealth for that price off E-bay...I think I know what tranny I'm running next. So I'm guessing you don't have to run a Spur gear or anything? |
|
| |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
