Re: Wreckluse Feedback, Support & FAQ
 

Has anyone gotten said CAD file? If not, I'll try and make one from the plastic panels I have, then post pics of what happens when I feed it into the "machine"
hehe. :D techshop lets idiots play with things we shouldn't.

Re: Wreckluse Feedback, Support & FAQ
 

Are the original Wreckluse decal sheets available for purchase? I'm looking for 2 sets if ya got 'em. Post up or PM me with a price and info.

Thanks,
Troy.

Re: Wreckluse Feedback, Support & FAQ
 

could all the running gear from a gmade R1 bolt onto one of these chassis?

Re: Wreckluse Feedback, Support & FAQ
 

I haven't tried that drivetrain

Re: Wreckluse Feedback, Support & FAQ
 

im looking at upgrading but kinda stuck as to what direction to go. wreckluse chassis with my R1 diffs and running gear or a axial wraith???

Get a Wreckluse and run wraith axles. That's what I have. Works great!

Re: Wreckluse Feedback, Support & FAQ
 

I'm looking for a Wreckluse chassis...but i'm wondering if my hardcase Sky lipos 3S 5000mah would fit in the chassis...that's a big factor if I need to buy more batteries...

Thanks!

Re: Wreckluse Feedback, Support & FAQ
 

checkout this thread.....I mount my battery in the same spot

http://www.rccrawler.com/forum/2-2-s...eckluse-5.html

here's a 4000...... I don't think the 5000 hardcase will fit

http://i743.photobucket.com/albums/x...ckluse/two.jpg

Re: Wreckluse Feedback, Support & FAQ
 

Im looking at rebuilding my Wreckluse. I need a hood and decal sheet. Where could I get one?

Re: Wreckluse Feedback, Support & FAQ
 

the HPI jeep rubicon body will work
If I have any extra hoods I'll post them on the site
I'll add the decal sheet to the website this weekend

Re: Wreckluse Feedback, Support & FAQ
 

That pic is from my rig...and I have a 4800 hard case that fits there also...tight , but it fits

Nice to see the photo getting around...."thumbsup"

Re: Wreckluse Feedback, Support & FAQ
 

Sure wish you would make new panels.....:roll:

Re: Wreckluse Feedback, Support & FAQ
 

Thanks man, also. I run a 5000 2s hardcase and it fits.

Re: Wreckluse Feedback, Support & FAQ
 

Here is a pic of mine how it sits.
http://i1111.photobucket.com/albums/...wa_2006/wl.jpg
http://i1111.photobucket.com/albums/...a_2006/wl4.jpg
Now I just need a new hood and decal sheet and its getting a nice wrap from the local decal shop.

Re: Wreckluse Feedback, Support & FAQ
 

looks great....I'm taking my Wreckluse for a walk tomorrow ...up near Big Bear in SoCal
I'll take some video ...it's a new spot

Re: Wreckluse Feedback, Support & FAQ
 

Also if you could post up the lenght of the links in inches eye to eye so I can make my own. Id like to get my servo from hitting the chassis.

Re: Wreckluse Feedback, Support & FAQ
 

I used Traxxas*Front*Turnbuckles...
for the bottom links and rear upper......3.78" or 96 mm


and I used Traxxas*Turnbuckle*Camber...
for the front upper links.......3.44" or 87.4 mm

I used these plates up front *RCP*Ax10/TLT*Aluminum...
don't remember why but I doubled them up and used RCP*Crawlers*Lower...
attached to the bottom...so the upper front link mount is at it's lowest point

I used STRC*Machined*Alum.... in the rear and mounted the links
to the bottom of the plate...bolts straignt up

how the link attachs to the axle can vary dimensions

but these JATO links are adjustable so I can the move the servo
just enought to miss the cross bar on the chassis

Re: Wreckluse Feedback, Support & FAQ
 

After a few falls, my hod is slowly starting to fall appart... anyone tried something else other than the HPI jeep hood? Timberwolf? i'm trying to figure ou something without the winch in the front, so I can install my own working winch...

Re: Wreckluse Feedback, Support & FAQ
 

I've seen the bronco and an old chevy

Re: Wreckluse Feedback, Support & FAQ
 

Some mods I did to a used project I picked up. It was someones first crawler and sheesh the paint job was a mess. Crawler was stripped and in the process of being rebuilt. Chassis mods were tig welded (not brazed) w/ 3/16 round rod.
Build Thread
http://www.rccrawler.com/forum/2-2-s...ml#post3988942

Some pics
http://imageshack.us/a/img560/5264/dscf3072r.jpg

http://imageshack.us/a/img442/9866/dscf3073h.jpg

http://imageshack.us/a/img507/9137/dscf3074m.jpg

http://imageshack.us/a/img593/6057/dscf3075r.jpg

http://imageshack.us/a/img842/4201/dscf3076r.jpg

http://imageshack.us/a/img811/6258/dscf3077f.jpg