Re: Wreckluse Feedback, Support & FAQ for the motor, I have a holmes hobby 35T with a BR-XL on 3S...very good... I actually craked the hood too, the HPI jeep is a direct fit? I know it's kinda sucky to scrap a complete body for the hood...but I think it might be cheaper to get the body from my hobbyshop than ordering a new hood from RCP ;) no offence Sozo, but with the shipping to Canada... |
Re: Wreckluse Feedback, Support & FAQ I'm running a HH 35T/Sidewinder/3S combo, great low end control and good wheel speed when I drop the hammer "thumbsup" |
Re: Wreckluse Feedback, Support & FAQ I run a 35t |
Re: Wreckluse Feedback, Support & FAQ I guess a 55T will be too slow |
Re: Wreckluse Feedback, Support & FAQ if your running a 3 cell lipo it will work fine |
Re: Wreckluse Feedback, Support & FAQ I have a 27 turn stock motor in mine , its a little bit fast but I also run 32 pitch gears 58 spur 15 pinion , I can slow it down with gearing when I need to , my second one will have a 55 t in it . |
Re: Wreckluse Feedback, Support & FAQ Can you guys post pics of how you mount your electronics? |
Re: Wreckluse Feedback, Support & FAQ all my electornics are mounted behind my dash....battery slides in behind the front wheels |
I also have an issue with the servo arm hitting the 4 link truss. Have you experienced this? |
Re: Wreckluse Feedback, Support & FAQ i got mine put together last night now i just need to get a new hood! http://i1281.photobucket.com/albums/...pse5eadb95.jpg http://i1281.photobucket.com/albums/...ps1145ce05.jpg |
Re: Wreckluse Feedback, Support & FAQ Quote:
Quote:
|
Mine is chassis mounted |
Re: Wreckluse Feedback, Support & FAQ post a pic ....maybe we can figure something out |
Re: Wreckluse Feedback, Support & FAQ Ok I really need some help Here are my link measurement. (actual link not eye to eye) Upper 115mm Front Upper 109mm Rear Lower 109mm Front Lower 93mm Rear Here is a pic. Look at the servo arm right on the 4 link mount http://i1054.photobucket.com/albums/...ps7d3c25d3.jpg Here is a shot of where the servo suppose to go and the 4 link mount is right at it http://i1054.photobucket.com/albums/...ps768d7395.jpg I have also tried a GCM mount which is not as high but its still hitting. What are my options, it seems I cant get axle mounted as the tabs on my axles is cutoff. I am thinking getting new links but not so sure..... |
Re: Wreckluse Feedback, Support & FAQ I see some custom fabrication.... you may want to flip the servo so the arm points forward and cut away some more from the front |
Re: Wreckluse Feedback, Support & FAQ Shes a runner!! I shaved off some of the 4 link truss and mounted the servo arm forward. It only hits on the left side. I am thinking of adding some spacers to the servo when I mount it to give me more clearance. |
Re: Wreckluse Feedback, Support & FAQ Cool work around Natski...post up some pics of that if you can... |
Re: Wreckluse Feedback, Support & FAQ Yes will post pic soon. I actually worked on it again and replaced the 4 link truss with the stock Axial 4 link mount (it sits lower on the axle). I also used some servo post to mount the servo higher and cut out some of the metal so the servo arm moves freely. It works better this way as I get more clearance. |
Re: Wreckluse Feedback, Support & FAQ Just wanted to let you know guys... HPI discontinued the Rubicon body #7182...dont break you hoods! |
Re: Wreckluse Feedback, Support & FAQ Will this be available again? |
Re: Wreckluse Feedback, Support & FAQ You might try emailing them directly https://rcpcrawlers.com/product.php?...7&cat=6&page=1 |
Re: Wreckluse Feedback, Support & FAQ Quote:
I see rockpiledriver hasn't been active for quite some time |
Re: Wreckluse Feedback, Support & FAQ Quote:
|
Re: Wreckluse Feedback, Support & FAQ 1 Attachment(s) Still got one of the First Attachment 384170 the Pyro Wreckuse I'll probably GRAB a V2W if your making. "thumbsup" |
Re: Wreckluse Feedback, Support & FAQ Quote:
Would be interested in a re-release if the price is right. |
Re: Wreckluse Feedback, Support & FAQ Quote:
|
Re: Wreckluse Feedback, Support & FAQ Any updates on the new batch? |
Re: Wreckluse Feedback, Support & FAQ Quote:
|
Re: Wreckluse Feedback, Support & FAQ Quote:
|
All times are GMT -6. The time now is 08:54 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com