RCCrawler.com Bulletin Board

Rockpiledriver · 06-01-2007, 04:33 PM

RCP Crawlers is now offering complete Twin Force axle kits.

Since Kyosho has discountinued both the Twin Force and the Twin force Spirit, RCP decided the only way to keep Twin force based rigs alive is to offer the axles as a complete set. So that's exactly what we have done. Each kit is complete wheel nut to wheel nut.

These kits have all the hardware required to build (2) axles either standard width or narrow width.

Each kit contains 2 extra short inner axles (dogbones) so the builder can decide axle width without purchasing extra parts.

Price $148.99

http://www.rcpcrawlers.com/kyosho.html

Bart bender · 11-30-2007, 07:31 PM

Can we still get Kyosho parts through you guys?

_BEN_ · 12-06-2007, 04:39 PM

Dang I saw this and got all excited. Just hoping RCP put Kyosho parts back up.

RCP, If/When you put these axles back up you should include two sets of ladder bars (PN: MA003). Or atleast make them optional.

Offroader5 · 12-12-2007, 11:46 AM

Bump for these...are you guys still carrying them?

_BEN_ · 12-12-2007, 12:57 PM

RCP, If you guys place a big order for kyosho parts could you also stock..
-Plastic twin force shocks
-Optional rings and pinions
-And some axle parts individually for repairs.

custumrig · 01-05-2008, 01:00 PM

the link does not work

Rockpiledriver · 01-05-2008, 01:41 PM

We have some stuff on the way guys. Once we get the axle kits back, we can work on other pieces. Since you guys are using different parts for your builds from other vehicles, a list of part numbers would really help.

_BEN_ · 01-05-2008, 05:26 PM

I personally think the ladder bars (MA003) should be included with future axle kits. They are pretty much a necessity unless one fabricates their own mounts.

Or even better RCP could make custom ones so the end user won't have to cut the arms off. Maybe that is asking too much for now though. Right now the demand for these parts are not that high (from my perspective) but if the Rock Force becomes reality I am sure demand will rise.

YAKIMA RC RACER · 01-16-2008, 02:14 PM

hey rockpiledriver any word on these yet

thanks
chad

Rockpiledriver · 01-16-2008, 03:03 PM

Should be only a day or 2 now.

Bart bender · 01-19-2008, 10:39 AM

The most popular gear sets are;
# MA050 (stock 13/43 (3.3:1) helical steel gear set)

And the lower ratio 10/43 (4.3:1) individual gears
# IS007

# IS008

Thanks for bringing Kyosho back to your sight!!!!

YAKIMA RC RACER · 02-02-2008, 02:08 PM

i was wondering are these in stock yet thanks

John · 02-02-2008, 02:31 PM

There was a delay in getting the parts from Kyosho. All parts for the Twin Force axles, I was told are on the way. I would check www.rcpcrawlers.com during the week.

YAKIMA RC RACER · 02-02-2008, 02:59 PM

hey thanks john for the info i appreciate it

K_Willis · 02-20-2008, 04:47 PM

Been checking the RCP site on a regular basis and still no sign.

What's the word on these?

sddill · 02-21-2008, 08:08 AM

Where are these @ on the rcp site???I really need a set for my 14r project...

Bart bender · 02-23-2008, 10:04 AM

They're not on the sight, they evidentilly are not in yet.

yotachump · 02-23-2008, 11:10 AM

Quote:

Originally Posted by Bart bender

They're not on the sight, they evidentilly are not in yet.

Maybe they have them and are waiting for something else

Enough said.

John · 02-23-2008, 11:49 AM

I know the order came in. I am pretty sure they will have them up on the site any day now.

Bart bender · 02-24-2008, 08:50 AM

Great news John, thanks.

06-01-2007, 04:33 PM	#1
Rockpiledriver I wanna be Dave Join Date: Apr 2004 Location: SoCal Posts: 4,212	*Twin Force Axle Kits are back in stock* RCP Crawlers is now offering complete Twin Force axle kits. Since Kyosho has discountinued both the Twin Force and the Twin force Spirit, RCP decided the only way to keep Twin force based rigs alive is to offer the axles as a complete set. So that's exactly what we have done. Each kit is complete wheel nut to wheel nut. These kits have all the hardware required to build (2) axles either standard width or narrow width. Each kit contains 2 extra short inner axles (dogbones) so the builder can decide axle width without purchasing extra parts. Price $148.99 http://www.rcpcrawlers.com/kyosho.html Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

11-30-2007, 07:31 PM	#2
Bart bender FIRE the Bamster!! Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 1,910	Can we still get Kyosho parts through you guys? Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

12-06-2007, 04:39 PM	#3
_BEN_ Quarry Creeper Join Date: Jun 2007 Location: Torrance, CA. Posts: 287	Dang I saw this and got all excited. Just hoping RCP put Kyosho parts back up. RCP, If/When you put these axles back up you should include two sets of ladder bars (PN: MA003). Or atleast make them optional. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

12-12-2007, 11:46 AM	#4
Offroader5 Picky Fab'r/Acetal Junky Join Date: Jul 2006 Location: Arizona Desert/AJ Posts: 3,107	Bump for these...are you guys still carrying them? Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

12-12-2007, 12:57 PM	#5
_BEN_ Quarry Creeper Join Date: Jun 2007 Location: Torrance, CA. Posts: 287	RCP, If you guys place a big order for kyosho parts could you also stock.. -Plastic twin force shocks -Optional rings and pinions -And some axle parts individually for repairs. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-05-2008, 01:00 PM	#6
custumrig Pebble Pounder Join Date: Jun 2007 Location: in rc crawler land Posts: 141	the link does not work Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-05-2008, 01:41 PM	#7
Rockpiledriver I wanna be Dave Join Date: Apr 2004 Location: SoCal Posts: 4,212	We have some stuff on the way guys. Once we get the axle kits back, we can work on other pieces. Since you guys are using different parts for your builds from other vehicles, a list of part numbers would really help. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-05-2008, 05:26 PM	#8
_BEN_ Quarry Creeper Join Date: Jun 2007 Location: Torrance, CA. Posts: 287	I personally think the ladder bars (MA003) should be included with future axle kits. They are pretty much a necessity unless one fabricates their own mounts. Or even better RCP could make custom ones so the end user won't have to cut the arms off. Maybe that is asking too much for now though. Right now the demand for these parts are not that high (from my perspective) but if the Rock Force becomes reality I am sure demand will rise. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-16-2008, 02:14 PM	#9
YAKIMA RC RACER Quarry Creeper Join Date: Apr 2007 Location: YAKIMA Posts: 248	hey rockpiledriver any word on these yet thanks chad Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-16-2008, 03:03 PM	#10
Rockpiledriver I wanna be Dave Join Date: Apr 2004 Location: SoCal Posts: 4,212	Should be only a day or 2 now. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-19-2008, 10:39 AM	#11
Bart bender FIRE the Bamster!! Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 1,910	The most popular gear sets are; # MA050 (stock 13/43 (3.3:1) helical steel gear set) And the lower ratio 10/43 (4.3:1) individual gears # IS007 # IS008 Thanks for bringing Kyosho back to your sight!!!! Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

02-02-2008, 02:08 PM	#12
YAKIMA RC RACER Quarry Creeper Join Date: Apr 2007 Location: YAKIMA Posts: 248	i was wondering are these in stock yet thanks Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

02-02-2008, 02:31 PM	#13
John Rock Crawler Join Date: Dec 2005 Location: Ventura County Posts: 889	There was a delay in getting the parts from Kyosho. All parts for the Twin Force axles, I was told are on the way. I would check www.rcpcrawlers.com during the week. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

02-02-2008, 02:59 PM	#14
YAKIMA RC RACER Quarry Creeper Join Date: Apr 2007 Location: YAKIMA Posts: 248	hey thanks john for the info i appreciate it Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

02-20-2008, 04:47 PM	#15
K_Willis Quarry Creeper Join Date: Nov 2005 Location: The Great White North Posts: 443	Been checking the RCP site on a regular basis and still no sign. What's the word on these? Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

Sponsored Links

02-21-2008, 08:08 AM	#16
sddill RCC Addict Join Date: Nov 2007 Location: E.T.R.C. Posts: 1,533	Where are these @ on the rcp site???I really need a set for my 14r project... Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

02-23-2008, 10:04 AM	#17
Bart bender FIRE the Bamster!! Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 1,910	They're not on the sight, they evidentilly are not in yet. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

02-23-2008, 11:49 AM	#19
John Rock Crawler Join Date: Dec 2005 Location: Ventura County Posts: 889	I know the order came in. I am pretty sure they will have them up on the site any day now. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

02-24-2008, 08:50 AM	#20
Bart bender FIRE the Bamster!! Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 1,910	Great news John, thanks. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler.com Bulletin Board

Thread: ***Twin Force Axle Kits are back in stock***

Thread: Twin Force Axle Kits are back in stock