Go Back   RCCrawler Forums > Vendors > RCP Crawlers
Loading

Notices

Thread: Check Out What We're Manufacturing for the AX10 **RCP Crawlers**

Reply
 
LinkBack Thread Tools Display Modes
Old 10-11-2007, 09:29 AM   #61
Rock Stacker
 
Join Date: Sep 2007
Location: seattle
Posts: 60
Default

Quote:
Originally Posted by gregrocks90046 View Post
it's called patience. the amount of pm's/email that RCP gets daily is mind boggling. did you try calling the toll free number? probably not. it's easier to complain here, right?
OMG, try calling, who would have thought??? Yes I did, and after that I figured email/PM was the easier route as they'd corresponded w/me via PM on this site before. It's now been >1 month and those two PM's haven't been responded to. These public forums are a way for us to share our experiences, good or bad. I don't think it's too much to ask for an update from a company, if Halo 3 release came/went and nothing happened, no update, should I not expect something? MS seems pretty busy, but I'd guess they'd take the time. These guys were posting from offroad expo (including uploading pics), they couldn't take a sec and acknowledge a release date had passed? You're right, maybe I'm expecting too much.
dr drae is offline   Reply With Quote
Sponsored Links
Old 10-11-2007, 09:31 AM   #62
I wanna be Dave
 
binaryterror's Avatar
 
Join Date: Jan 2004
Location: Detroit
Posts: 3,583
Default

I've been treated well so far by the RCP guys, and patiently await upgrades.

binaryterror is offline   Reply With Quote
Old 10-11-2007, 09:38 AM   #63
RCC Addict
 
Join Date: Jul 2006
Location: So Cal USA
Posts: 1,109
Default

Quote:
Originally Posted by dr drae View Post
OMG, try calling, who would have thought??? Yes I did, and after that I figured email/PM was the easier route as they'd corresponded w/me via PM on this site before. It's now been >1 month and those two PM's haven't been responded to. These public forums are a way for us to share our experiences, good or bad. I don't think it's too much to ask for an update from a company, if Halo 3 release came/went and nothing happened, no update, should I not expect something? MS seems pretty busy, but I'd guess they'd take the time. These guys were posting from offroad expo (including uploading pics), they couldn't take a sec and acknowledge a release date had passed? You're right, maybe I'm expecting too much.
SHUTUP.
KRAWLR4life is offline   Reply With Quote
Old 10-11-2007, 09:41 AM   #64
Rock Stacker
 
Join Date: Sep 2007
Location: seattle
Posts: 60
Default

Free speech dude, I'm sorry my opinion differs from yours.


RCP, my apologies for cluttering your release thread, best of luck w/the product release.
dr drae is offline   Reply With Quote
Old 10-11-2007, 09:46 AM   #65
Quarry Creeper
 
Join Date: Jul 2007
Location: Kentucky
Posts: 445
Default

This hobby breeds impatience. When you have a project just sitting there waiting on a part it's easy to get hung up on a date of release. As that date passes, the agony of waiting becomes more intense with each day.

The best thing to do is just chill out and be patient.
GreenRiver is offline   Reply With Quote
Old 10-11-2007, 10:30 AM   #66
RCC Addict
 
Join Date: Jul 2006
Location: So Cal USA
Posts: 1,109
Default

Quote:
Originally Posted by dr drae View Post
Free speech dude, I'm sorry my opinion differs from yours.


RCP, my apologies for cluttering your release thread, best of luck w/the product release.
Yeah, your opinion has been revised...
KRAWLR4life is offline   Reply With Quote
Old 10-11-2007, 10:47 AM   #67
Quarry Creeper
 
Join Date: Sep 2007
Location: No Cajones en El Cajones
Posts: 495
Default

Yo RCP, do you know when the servo mount that utilizes 6 cell stick packs will be ready? And thanks a ton for the super duper fast service I've had with you in the past. YOU GUYS ROCK!!!
Cheatin is offline   Reply With Quote
Old 10-11-2007, 11:11 AM   #68
Rock Crawler
 
Join Date: Jul 2007
Location: central PA
Posts: 679
Default

Sweet products on the way

Maybe the ones who complain about release dates should go back to TLT axles
Hildy is offline   Reply With Quote
Old 10-11-2007, 11:12 AM   #69
I wanna be Dave
 
Join Date: Apr 2004
Location: SoCal
Posts: 5,027
Default

Trust me if we had a firm date to give we would. We were originally told they would be in our hands on Sept 20th. We posted that, and our manufacturer let us down. Since we listed that date, we in turn let our customers down. Once we place an order for a part we are at the manufacturers mercy as to when it will actually arrive. This being the case, it is unlikely we will ever post an estimated due date again because of unforseen delays. Sorry about that guys.
Rockpiledriver is offline   Reply With Quote
Old 10-11-2007, 11:16 AM   #70
Quarry Creeper
 
Join Date: Sep 2007
Location: No Cajones en El Cajones
Posts: 495
Default

Quote:
Originally Posted by Rockpiledriver View Post
Trust me if we had a firm date to give we would. We were originally told they would be in our hands on Sept 20th. We posted that, and our manufacturer let us down. Since we listed that date, we in turn let our customers down. Once we place an order for a part we are at the manufacturers mercy as to when it will actually arrive. This being the case, it is unlikely we will ever post an estimated due date again because of unforseen delays. Sorry about that guys.
No problem, I can wait. Try waiting on custom Harley parts or a race car frame. A few weeks compared to 6 months for my bike or race car is nothing.
Cheatin is offline   Reply With Quote
Old 10-11-2007, 11:17 AM   #71
Quarry Creeper
 
Join Date: Jun 2007
Location: Del mar
Posts: 411
Default

When will you get more GD600 units and parallel deans addaptors?
Great service at RCP!
Usmc8541 is offline   Reply With Quote
Old 10-11-2007, 11:39 AM   #72
RCC Addict
 
Join Date: Feb 2005
Location: Crawlifornia Uber Alles
Posts: 1,146
Default

Quote:
Originally Posted by dr drae View Post
Free speech dude, I'm sorry my opinion differs from yours.
exactly. don't get hurt when we express our free speech as well.
gregrocks90046 is offline   Reply With Quote
Old 10-11-2007, 11:47 AM   #73
RCC Addict
 
Join Date: Sep 2006
Location: Redlands
Posts: 1,053
Default

Quote:
Originally Posted by dr drae View Post
OMG, try calling, who would have thought??? Yes I did, and after that I figured email/PM was the easier route as they'd corresponded w/me via PM on this site before. It's now been >1 month and those two PM's haven't been responded to. These public forums are a way for us to share our experiences, good or bad. I don't think it's too much to ask for an update from a company, if Halo 3 release came/went and nothing happened, no update, should I not expect something? MS seems pretty busy, but I'd guess they'd take the time. These guys were posting from offroad expo (including uploading pics), they couldn't take a sec and acknowledge a release date had passed? You're right, maybe I'm expecting too much.

The only thing I can think of to say to this, is relax.

I understand full well the down fall of manufactures. It sucks when you expect something to get done, then something unforseen happens and you're left without parts. Thats life. Grow some patients and calm down, your life will be a little easier, trust me.
PaulEZK is offline   Reply With Quote
Old 10-11-2007, 02:24 PM   #74
Rock Crawler
 
Join Date: Jan 2005
Location: Nanakuli
Posts: 638
Default

No worries! Alot of guys are breaking parts which are hard to come by, I myself know this. As for the eta's that you guys give I totally understand! Remeber guys they don't make they just distribute thing
kaaina is offline   Reply With Quote
Old 10-15-2007, 01:29 PM   #75
I wanna be Dave
 
Join Date: Apr 2004
Location: SoCal
Posts: 5,027
Default

We recieved a large shipment of AX10 parts this morning. We are taking pictures and will get them up on the site this evening.

In Stock

AX10 black anodized max steer aluminum knuckles
AX10 black anodized two position aluminum c's
AX10 black anodized straight axle adaptors. These are machined round and smooth like the stock C's and axle housing. A very nice looking addition and upgrade to your axles.
Straight axles are coming wednesday.
Rockpiledriver is offline   Reply With Quote
Old 10-15-2007, 01:32 PM   #76
I wanna be Dave
 
FrankyRizzo's Avatar
 
Join Date: Apr 2005
Location: Vegas
Posts: 7,172
Default

Looking forward to it!!
FrankyRizzo is offline   Reply With Quote
Old 10-15-2007, 02:03 PM   #77
RCC Addict
 
Join Date: Jul 2006
Location: So Cal USA
Posts: 1,109
Default

Me Me me me me!
Thanks John!
KRAWLR4life is offline   Reply With Quote
Old 10-15-2007, 02:33 PM   #78
Pebble Pounder
 
Join Date: May 2006
Location: CANYON LAKE
Posts: 181
Default

THANKS TO RCP FOR ALL THE NEW AX10 PARTS
black anodized max steer aluminum knuckles and black anodized two position aluminum c's. The machined round black anodized straight axle adaptors good work keep it up.
BRONCOBASS is offline   Reply With Quote
Old 10-15-2007, 06:18 PM   #79
I wanna be Dave
 
Join Date: Dec 2006
Location: here
Posts: 3,042
Default

Very cool cant wait save me enough for one rig
thanks RCP
tapped-out is offline   Reply With Quote
Old 10-15-2007, 08:28 PM   #80
I wanna be Dave
 
Join Date: Apr 2004
Location: SoCal
Posts: 5,027
Default

We have a few hundred of each that came in, but I think they are going to go fast. We have already ordered a second shipment.
Rockpiledriver is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com