Check Out What We're Manufacturing for the AX10 **RCP Crawlers**
 

We know you want it!

So we are making it!

Manufactured by RCP Crawlers

AX10 Aluminum Upgrades!


Black Anodized C's - Prototypes are manufactured - Testing In progress - Production starts shortly
http://img402.imageshack.us/img402/742/scorpionccy4.jpg

Black Anodized Max Steer Knuckles - Prototypes are manufactured - Testing in progress - Production will start shortly (These will allow max steer when used with the MIP CVD's)
http://img406.imageshack.us/img406/4...knucklety7.jpg

Custom servo mount. Allows use of standard 6 cell stick pack and locates the battery down low ( supports the battery just off the top links)- Prototype finished - Testing in progress- production to start in two weeks.

Custom narrowed chassis - Testing in progress - Production to start after more testing is completed. We are making some changes to the chassis at this time.
http://img53.imageshack.us/img53/9804/ax10rdrh7.jpg

Other items we are working on.

- MIP CVD's (Design phase)
- Rear lockout axle adaptors (black anodized aluminum - prototype manuf. stage)
- Straight axles ( prototype manuf. stage)
- Tri link black anodized aluminum mount (prototype manuf. stage)
- Tri link black anodized aluminum rod end (prototype manuf. stage)
- Receiver tray for narrowed chassis ( design phase)

It's a great time to be involved with RC Crawling. New parts, new kits and much more to come. If you haven't pre-ordered an AX10 and are looking to purchase one, you can click on link below, to buy one now. http://www.rcpcrawlers.com/truck_kits.html

Well, that was quick!

We just may have some knuckles and C's here by Nat's.

Looks great as usual.

I spoke to Brian about clocking the rear C's 90 degrees so you can have the knuckles arm on top to lock them out. That way you won't have the arm sticking out the back.

Sounds doable. Cool idea. Now that we have the cad file for the stock C's, it is a simple change for the factory to clock the C's at any angle.

Upon re-examination of your request it does appear that we can meet your needs. :flipoff:

Can you make straight axle kits that fit in place rather than the C?
It would be nice to see such for this and the WK axle.

I think this is a canned answer.

That's some friggin sweet stuff!!

You guys are the best!!"thumbsup"

hey rcp,,

how bout an update on the progress of this stuff..

i'm gettin all excited"thumbsup"

awesome upgrades... cant wait for them to come out..


yeah, any pics of the testing maybe???

We are in production. The final design was changed a little from the original cad drawings shown above. The C's are now two position and we have added a straight axle adaptor. The Straight axle adaptor is not square and has a great smooth look to it.

All three AX10 upgrade parts are due to arrive Sept 20th. It won't be long. The first shipment is large, so there will be plenty to go around.

Do you guys have any prices set?

All will be priced in the low $20's and will come as a pair (left and right)

Kinda off topic, but still related....do you have any idea of an ETA on the stand alone AX10 trans for purchase? I'd like to have one in hand before I finish the design of my newest chassis 8)

Hello RCP, ANY CHANCE YOU GUYS COULD COME UP WITH A SUPERIOR METHOD OF FIXING THE SUSPENSION TOP LINK TO THE AXLE? I BROKE MINE VERY EASILY WITH AN 8" DROP ONTO THE FRONT END, MATT AT AXIAL TOLD ME THEY HAVE ADDED A BIT MORE MATERIAL TO THE OFFENDING PART(SPRUE PART# AX80003) BUT THIS DOES MEAN THAT I HAVE TO BUY LOTS OF AXLE HOUSINGS JUST TO TO GET THAT TINY PART AND A COUPLE OF SPARES.

when do you think that we can start and preorder these parts?

thanx ka'aina

W0W!!!!! Looks great any updates?

cant wait to see them"thumbsup"