|
| LinkBack | Thread Tools | Display Modes |
02-05-2020, 09:46 PM | #1 |
Rock Stacker Join Date: Sep 2019 Location: La Luz
Posts: 73
| Gen 8 c's and panhard mounting
Anybody running the treal brass c's on their gen 8? Got them on mine, they rotate the shock tabs 90*, and my shocks are mounted in the front. Im wondering if using the backside of the shock mount to extend my panhard a bit, and mount it to the brass rather than the flexy stock mount, would be advantageous?
|
Sponsored Links | |
02-05-2020, 09:49 PM | #2 |
Rock Stacker Join Date: Sep 2019 Location: La Luz
Posts: 73
| Re: Gen 8 c's and panhard mounting https://www.amazon.com/Treal-Caster-...0964426&sr=8-7 These are the c's (c hubs, caster mounts etc.) |
02-07-2020, 09:43 PM | #3 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,259
| Re: Gen 8 c's and panhard mounting
if you move.the panhard bar to the front side of the mount then you can run a 30mm screw through your upper link mount and use a rod end to conect to the pan hard bar link and that mount.will never move again and if you realy want to make sure it.lasts get the ssd link mounts there a huge improvement over other designs
|
Gen 8 c's and panhard mounting - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Redcat gen 8 & gen 7 trailing wicked snow trail for a race | shenlonco | Scale Videos! | 0 | 02-20-2019 07:05 AM |
Redcat gen 8 scout & gen 7 sport ( epic snow trail adventure ) | shenlonco | Scale Videos! | 0 | 02-08-2019 12:35 PM |
Thread Tools | |
Display Modes | |
| |