RCCrawler Forums

Big Pitt · 09-28-2010, 03:14 PM

Hello,
After looking in "our" section I didn't find what I was lookinf for.

So here it is.
http://www.losi.com/Products/Feature...odId=LOSA7681B

http://www.losi.com/Products/Feature...rodId=LOSA7020

I 'm thinking of buying Losi 2.2 Comp Crawler wheels and tires to put on my RS10, but I dont know if the hex size of the Losi wheels are the same as the RS10.

Let me know it would help me.

ctracy · 09-28-2010, 03:56 PM

u need a 12 mm hex. not sure if that is what the losi wheels are.

Big Pitt · 09-28-2010, 04:10 PM

Thanks for that quick answer and:

YES it is

So now I can pay a visit to my favorite RC reseller and wait impatiently next to my mail box.

ctracy · 09-28-2010, 04:11 PM

like tom petty sang...."the waiting is the hardest part" good luck man.

jsowens · 09-28-2010, 07:40 PM

They should fit just fine. Personally, if I was gonna spend money on a new set of plastic beadlocks, I'd save up a little more and pick up a decent set of aluminum ones. They'll last a lot longer. Those tires will be a good upgrade for you, though.

dudegetabike · 10-02-2010, 10:05 PM

I'm running thse wheels right now. Not a bolt on though. the centering hole is a different size and two step on the rs10 while the losi wheels just have the hex and hole. you can drill the centers of the wheels and they bolt on but don't fully seat. They have a beter offset though and will reduce tire scrub on the shocks while turning. Also narrower so your tires will be taller! Get some memory foam for tose rovers and you're in business

09-28-2010, 03:14 PM	#1
Big Pitt Pebble Pounder Join Date: Sep 2010 Location: Brussels/Belgium Posts: 196	?Losi Comp Crawler 2.2 Beadlock Wheels on the RS10? Hello, After looking in "our" section I didn't find what I was lookinf for. So here it is. http://www.losi.com/Products/Feature...odId=LOSA7681B http://www.losi.com/Products/Feature...rodId=LOSA7020 I 'm thinking of buying Losi 2.2 Comp Crawler wheels and tires to put on my RS10, but I dont know if the hex size of the Losi wheels are the same as the RS10. Let me know it would help me. Last edited by Big Pitt; 09-28-2010 at 03:33 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-28-2010, 03:56 PM	#2
ctracy Quarry Creeper Join Date: Jul 2010 Location: Independence Posts: 368	u need a 12 mm hex. not sure if that is what the losi wheels are.

09-28-2010, 04:10 PM	#3
Big Pitt Pebble Pounder Join Date: Sep 2010 Location: Brussels/Belgium Posts: 196	Thanks for that quick answer and: YES it is So now I can pay a visit to my favorite RC reseller and wait impatiently next to my mail box.

09-28-2010, 04:11 PM	#4
ctracy Quarry Creeper Join Date: Jul 2010 Location: Independence Posts: 368	like tom petty sang...."the waiting is the hardest part" good luck man.

09-28-2010, 07:40 PM	#5
jsowens RCC Addict Join Date: Jul 2009 Location: Blacksburg, VA Posts: 1,882	They should fit just fine. Personally, if I was gonna spend money on a new set of plastic beadlocks, I'd save up a little more and pick up a decent set of aluminum ones. They'll last a lot longer. Those tires will be a good upgrade for you, though.

10-02-2010, 10:05 PM	#6
dudegetabike Pebble Pounder Join Date: Apr 2010 Location: Brighton, MI Posts: 175	I'm running thse wheels right now. Not a bolt on though. the centering hole is a different size and two step on the rs10 while the losi wheels just have the hex and hole. you can drill the centers of the wheels and they bolt on but don't fully seat. They have a beter offset though and will reduce tire scrub on the shocks while turning. Also narrower so your tires will be taller! Get some memory foam for tose rovers and you're in business

Sponsored Links

RCCrawler Forums

Thread: ?Losi Comp Crawler 2.2 Beadlock Wheels on the RS10?