Novak Terra Claw Crawling Brush Motor 55T Anyone tried/heard anything on these? Thinking about buying a pair. |
I would pass . I had a pair on my 10 with a 10/9 pinion combo . Had about half the wheelspeed of my stock 380s , and the torque was nothing to brag about. If you were already modded for 540's and had em lying around I would say drop em in , but I wouldnt buy em again. You can get a pair of 35t lathes for the same price way more wheelspeed and torque. |
Ahhh gotcha, I'm juss tryin to find some cheap 540's that the stock esc can push good. |
X2. I got some integy 55turn motors. They have great torque but I lost alot of wheel speed. 3s lipo solved that."thumbsup" Once you get 540s in there you'll wonder why redcat even bothered with 380's. |
I bet. I may get a pair of novak 45's or some rc4wd 50t's prolly go the cheap route first, to close to christmas to be spending money on myself. |
i bought the rc4wd cheap ones 55t. wishing i would have got the 45t for a little more wheel speed. I have the sttel gears so i dont think it would be an issue there. |
it's either the cheepos or a pair of 85t integy lathe motors *ponders* 85t isn't that like having a super low geared transmission? I don't fully understand wat the turns mean |
Higher the number, the more torque...lower the number, the more wheelspeed. For example...35 turn = faster; 85 turn = slower. A 55 turn motor would be a good balance, but if you wanted to go a tad faster a 35 or 45 turn would be good. |
no need for 85t in a rs10 at all. You will hate the slowness unless your running 3s lipo. You dont want to go over 55t with that rig and I suggest 35t still very crawlable motor plus you can jump your rig across gaps on 2s. I run 55ts in my 10lb clod and its so/so but I cant pop the wheels off the ground. |
I ordered 2 45t rc4wds i'll grab some novak 45's after the 1st of the year |
yess i got this motor on my rs10 and i ts awsome for the price...lots of tork and power !!!!! http://img843.imageshack.us/img843/9969/dsc02561x.jpg Uploaded with ImageShack.us |
Just got my new integy 60 turns in the mail today! At $10.99 each direct from integy I don't think I could go wrong! And Im running 3s. |
yes for sure your good whit the integy one ....my buddy have that motor and is verry goog too |
All times are GMT -6. The time now is 12:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com