I broke something. Haven`t seen this yet!!! I just got my zno diff plates today. When I tore down the axles, I found this. The threaded pins, holding the diff cups onto the shaft, had sheared off just below the threads. Both sides. I was able to unscrew the threaded portion. But the unthreaded portion still had just enough lip left that they wouldn`t slide out. I had to hammer them out with some difficulty. I think with the amount of power I`m working into this thing, I`m going to have to work out a stronger option. http://i1179.photobucket.com/albums/...g?t=1330162826 http://i1179.photobucket.com/albums/...g?t=1330162866 |
Re: I broke something. Haven`t seen this yet!!! It shows you're really trying! :mrgreen: |
Re: I broke something. Haven`t seen this yet!!! I also had that problem with 540 motors and 3s lipo I drilled them out to the next size and thredded both holes and put regular screws in works good |
Re: I broke something. Haven`t seen this yet!!! Quote:
|
Re: I broke something. Haven`t seen this yet!!! Hey thats the same thing that happened to mine it striped so the back wheels wouldnt spin , but luckily i had two trucks so i took it off the other one. But then the next day the front broke so now i still have to replace the front. |
Re: I broke something. Haven`t seen this yet!!! Yep! just went through that myself. I pressed a pin in mine. I have an assortment at work so it worked out well for a fix. |
Re: I broke something. Haven`t seen this yet!!! I like the idea of threading it all the way through. I'd like to get as much slop out of the drive line as I can. I get enough just from the dogbone system. The more surface contact on that pin, the stronger, and the better! I'm chasing some slipping somwhere in that axle still. spur pin and plate are perfect. Pinion gear is holding and meshed. I Can't have stripped these METAL gears, can I? Find out in an hour or so. |
Re: I broke something. Haven`t seen this yet!!! Dude your awesome. You break everything right before I do so all I have to do is look back through your posts for the fix! |
Re: I broke something. Haven`t seen this yet!!! Quote:
Well then; I REGRET TO INFORM YOU THAT YOU NEED A NEW ESC!!! :lmao: Last night I let the magic SMOKE out. I was chasing down the slipping in my front axle. So I had a 2s lipo plugged into it, while the axle was apart, so I could check the gears. All of a sudden, the esc smoked, and throttle went full, until I unplugged the battery. Now it happens everytime the battery is plugged in. |
Re: I broke something. Haven`t seen this yet!!! Oh I beat you on that one when I went to a gt3b and dual esc. Have fun shopping for a new one or two. I like my dual esc digs! |
Re: I broke something. Haven`t seen this yet!!! Yup glad u guys are doing the legwork on the breakages...its only a matter of time for me running 3s lipos now...thx guys! |
Lol I'm in on esc taking a dump. Got my Redcat completly back together tonight and the escape cuts off randomly. Takes a good whack to get it to start again. |
Re: I broke something. Haven`t seen this yet!!! Quote:
What esc's are you running? I'm looking through stats right now. How is your slow-speed-throttle curve? I think thats going to decide how much $$$ I'm dropping on speed controls |
I put a outcry dual esc on my gmade buggy n it worked great for the 3 minutes it ran lol. I just picked up another one from a member in the classifieds for 40 bucks to put in my Redcat. |
Re: I broke something. Haven`t seen this yet!!! Quote:
|
Re: I broke something. Haven`t seen this yet!!! 20.00 ebay puppies. can't complain, but haven't played with them much. |
Re: I broke something. Haven`t seen this yet!!! Quote:
I don't care who you are, that's funny right there! |
Quote:
|
All times are GMT -6. The time now is 05:57 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com