RCCrawler Forums

Leadchucker · 11-27-2012, 11:55 PM

OK Just ordered my RS10XT am very exited expecially after looking through the forums. With what I am reading i am all ready wanting to upgrade to the 540 motors and it isn't even at my house yet. Pardon my ignorance or just lazyness in searching but can anyone tell me what I have to do to mod. Or what aluminumn gearbox I need to order to make the 540 motor work? would just as soon order the gearbox since I am already having to open it up and put the steel gears and pin in anyway.

Thanks in advance.

Mr. Make it Work · 11-28-2012, 12:11 AM

ZNO RC has a Set up for ya!

RS10 Big Boy 540 Preassembled Kit w/ New Gear Cases (2)

Also look up DIY 540 I the search bar

Mr. Make it Work · 11-28-2012, 12:20 AM

Oops. I remembered it wrong but found it

http://www.rccrawler.com/forum/redca...k-through.html

Also don't forget about your link set up and esc.

The Jackalope · 11-28-2012, 12:37 AM

http://www.rccrawler.com/forum/redca...+my+first+rs10

Leadchucker · 11-28-2012, 04:49 AM

Yea I just read those. Thank you for the quick links on my thread though so I can reference them when I go to do it. Is there an aluminumn gearbox out there that can replace the platic one? I was hopeing to switch out to aluminumn axles at some point too.

Docwolf · 11-28-2012, 05:17 AM

There are no housing upgrades. Really, housing failures are rare.

11-27-2012, 11:55 PM	#1
Leadchucker Rock Stacker Join Date: Nov 2012 Location: anchorage Posts: 55	NOOB Question OK Just ordered my RS10XT am very exited expecially after looking through the forums. With what I am reading i am all ready wanting to upgrade to the 540 motors and it isn't even at my house yet. Pardon my ignorance or just lazyness in searching but can anyone tell me what I have to do to mod. Or what aluminumn gearbox I need to order to make the 540 motor work? would just as soon order the gearbox since I am already having to open it up and put the steel gears and pin in anyway. Thanks in advance.

11-28-2012, 12:11 AM	#2
Mr. Make it Work Rock Stacker Join Date: Feb 2010 Location: Monterey Bay Posts: 60	Re: NOOB Question ZNO RC has a Set up for ya! RS10 Big Boy 540 Preassembled Kit w/ New Gear Cases (2) Also look up DIY 540 I the search bar

11-28-2012, 12:20 AM	#3
Mr. Make it Work Rock Stacker Join Date: Feb 2010 Location: Monterey Bay Posts: 60	Re: NOOB Question Oops. I remembered it wrong but found it http://www.rccrawler.com/forum/redca...k-through.html Also don't forget about your link set up and esc.

11-28-2012, 12:37 AM	#4
The Jackalope Rock Crawler Join Date: Feb 2011 Location: Courtenay Posts: 716	Re: NOOB Question http://www.rccrawler.com/forum/redca...+my+first+rs10

11-28-2012, 04:49 AM	#5
Leadchucker Rock Stacker Join Date: Nov 2012 Location: anchorage Posts: 55	Re: NOOB Question Yea I just read those. Thank you for the quick links on my thread though so I can reference them when I go to do it. Is there an aluminumn gearbox out there that can replace the platic one? I was hopeing to switch out to aluminumn axles at some point too.

11-28-2012, 05:17 AM	#6
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	There are no housing upgrades. Really, housing failures are rare.

NOOB Question - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Noob question	derrka78	Electronics	3	10-24-2011 11:38 PM
Non-noob question	Colby	Comments, Suggestions, and Help	4	06-29-2010 07:09 AM
Noob Question	Big D	Newbie General	2	08-13-2008 08:21 PM
Hello and a question from a noob	SMUDGEBUG	Newbie General	4	09-24-2007 08:06 PM

Sponsored Links

RCCrawler Forums

Thread: NOOB Question