Tools for the Redcat RS 10 XT

[AutoCrawler]

The RS10 XT is constructed with a fairly random set of fasteners. My guess is whatever the designer happened to have on his workbench at the time At least they are all metric and not a world fusion mix.

Compiled this list in case it's helpful to anyone. Let me know if you spot any mistakes.

Screws nuts and tool sizes

Philips selftap
Driver
Lengths (mm)
Where Used


2 counter sunk
#1
6
Drive Gear Flange Plate (the plastic one)


2
#1
6



2.6
#1
6,10,8



3
#1
10










Philips
Driver
Lengths (mm)
Where Used


2.5
#1
6,8,10,12,14,17



3
#1
8,10,14,21,24










Hex head screw
hex key (mm)
Lengths (mm)
Where Used


M2 cap
2
8
bead locks


M2.5 grub
1.3
2.5
8T pinion


m3 grub
1.5
3, 3-2*7
drive shaft cups and hexes. 10T pinion









Nuts (nylock)
socket/wrench

Where Used


M2.5
5mm

lower Shocks and links


M3
5.5mm

upper Shocks


M4 flange
7mm

wheel axle

[IQLogic]

Many thanks for the list

You need imperial hex driver for pinion Salesman from hobbyshop in my town told me but I don't remember exact size

[AutoCrawler]

ur welcome.

I just confirmed the 10T pinion takes a 1.5mm hex key so its probably an M3 grub (set) and the 8T pinion takes 1.3mm hex key and is probably an M2.5 grub (set)

I'll measure them just as soon as I can find my calipers....grrr found them finally and confirmed.

10T = M3 3.25mm with 1.5mm hex key
8T = M2.5 2.5mm with 1.3mm hex key

I got this set of small hex keys

Wiha 35392 5-piece Micro Metric Short Arm Hex Key Set in Mini Molded Holder

1.3mm is very small so I'm sure there is an imperial cross

[IQLogic]

I was in hobbyshop and salesman use imperial hex .050" (1.27 mm - equivalent to metric 1.3 mm)

I ordered this driver set from eBay