Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Redcat Crawlers
Loading

Notices

Thread: RS10XT has programmable ESC

Reply
 
LinkBack Thread Tools Display Modes
Old 04-09-2015, 08:45 AM   #1
Pebble Pounder
 
Join Date: Mar 2015
Location: East coast Canada
Posts: 107
Default RS10XT has programmable ESC

After having my RS10 for a bit it bothered me that I had to keep my throttle trim 13% to the rear so the truck wouldn't want to move forward. I was looking on redcats site today and found this: http://www.redcatracing.com/manuals/E401.pdf

Turns out you can set the throttle zero/ max points, voltage cutoff and heat cut offs through the ESC.

Everything else I've read about the little white button was just about the reverse brake. Turns out it's a program button.

I've since reprogrammed my throttle points ( which now have my trims at 0 ) and low voltage cutoff.

Hope this helps someone
Damion10 is offline   Reply With Quote
Sponsored Links
Old 04-09-2015, 06:15 PM   #2
RCC Addict
 
Join Date: May 2011
Location: at home
Posts: 1,099
Default Re: RS10XT has programmable ESC

so you finally read the instructions?
every thing needs to be calibrated, nothing comes fully ready from the factory
specially at the prices we are paying or these redcats
cabron is offline   Reply With Quote
Old 04-09-2015, 08:59 PM   #3
Pebble Pounder
 
Join Date: Mar 2015
Location: East coast Canada
Posts: 107
Default Re: RS10XT has programmable ESC

There was nothing in the instruction booklet that came with the truck about this. I was looking at the ESC in redcats parts and saw there was a pdf link. Clicked on it and found the ESC program info
Damion10 is offline   Reply With Quote
Old 04-26-2015, 05:51 PM   #4
Rock Crawler
 
Join Date: Feb 2011
Location: Courtenay
Posts: 716
Default Re: RS10XT has programmable ESC

So all these years I could have had lips low voltage cutoff on my esc and didn't even realize it?!?!?! #%^*
The Jackalope is offline   Reply With Quote
Old 07-13-2015, 12:20 AM   #5
Rock Crawler
 
Join Date: Feb 2015
Location: Melbourne
Posts: 639
Default Re: RS10XT has programmable ESC

Has anyone tried this ESC running off a single motor? Because the same ESC appears to be used by HaiBoxing and I can pick one up locally for $AUD25.00. That's not bad for a programmable ESC with lipo cutoff etc.
honchojoe is offline   Reply With Quote
Old 07-13-2015, 07:18 PM   #6
Pebble Pounder
 
Join Date: Mar 2015
Location: East coast Canada
Posts: 107
Default Re: RS10XT has programmable ESC

Quote:
Originally Posted by honchojoe View Post
Has anyone tried this ESC running off a single motor? Because the same ESC appears to be used by HaiBoxing and I can pick one up locally for $AUD25.00. That's not bad for a programmable ESC with lipo cutoff etc.
The motor wires are wired parallel, so I would assume just using one set of wires wouldn't harm anything.
Damion10 is offline   Reply With Quote
Reply



RS10XT has programmable ESC - Similar Threads
Thread Thread Starter Forum Replies Last Post
RS10xt ESC calibration question jim_w Redcat Crawlers 21 03-01-2015 10:52 AM
programmable ESC's romac Electronics 8 11-13-2012 10:31 AM
Is the esc programmable SpeedFreak675 Losi Micro-Rock Crawler 9 01-04-2010 02:20 AM
Mamba Max programmable at brushed Motor? Bruno Benzini Electronics 3 07-09-2009 09:57 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com