Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Redcat Crawlers
Loading

Notices

Thread: Everest 10 axle shafts?

Reply
 
LinkBack Thread Tools Display Modes
Old 04-13-2018, 09:17 PM   #1
Newbie
 
Join Date: Jan 2016
Location: hesperia
Posts: 4
Default Everest 10 axle shafts?

My front dog bones are slipping. Is there an upgrade shaft. I already have the axial lockers.
1rockhead is offline   Reply With Quote
Sponsored Links
Old 04-13-2018, 09:20 PM   #2
Quarry Creeper
 
Join Date: Jan 2016
Location: Wichita
Posts: 267
Default Re: Everest 10 axle shafts?

What do you mean slipping? They shouldn't be unless the diff is stripped or you took off too much material when doing the mod. Unless, they're slipping out of the drive cups?

Sent from my SAMSUNG-SM-G900A using Tapatalk
the_law_man01 is offline   Reply With Quote
Old 04-14-2018, 06:45 AM   #3
Newbie
 
Join Date: Jan 2016
Location: hesperia
Posts: 4
Default Re: Everest 10 axle shafts?

They are slipping at the drive cups
1rockhead is offline   Reply With Quote
Old 04-14-2018, 10:23 AM   #4
Quarry Creeper
 
Join Date: Jan 2016
Location: Wichita
Posts: 267
Default Re: Everest 10 axle shafts?

Quote:
Originally Posted by 1rockhead View Post
They are slipping at the drive cups
Did you do any steering mods for more steering angle? If so and they're slipping while turning, that's probably the cause and reducing the max steering angle a little should fix it.

If not and you have play at the stub axle while it's stationary and straight, you could try shimming it on the back side (nearest the drive cup). But, you don't have much room to play with their.

Otherwise, you could shim the ankle itself pulling it out to the drive cup a bit.

A few options there. Hope that helps.

Sent from my SAMSUNG-SM-G900A using Tapatalk
the_law_man01 is offline   Reply With Quote
Old 04-14-2018, 10:33 AM   #5
Newbie
 
Join Date: Jan 2016
Location: hesperia
Posts: 4
Default Re: Everest 10 axle shafts?

So there are not axial cva or universals that i can make work
1rockhead is offline   Reply With Quote
Old 04-14-2018, 10:48 AM   #6
RCC Addict
 
Join Date: Jan 2012
Location: Vancouver
Posts: 1,916
Default Re: Everest 10 axle shafts?

Gen7 cv axles are a direct fit but since you have an axial locker you would have to mod them to fit.

Axial shaft with work might need some bearing if there is any difference in ID of bearings and OD of axle shaft. As you will need to shim the axle shafts. Redcat made a long side and a short side and the axial shafts are both the same length but you need to shim the long side to help with in and out play.
hillbillyrc is offline   Reply With Quote
Old 04-14-2018, 11:48 AM   #7
Quarry Creeper
 
Join Date: Jan 2016
Location: Wichita
Posts: 267
Default Re: Everest 10 axle shafts?

Yep. There are.

Sent from my SAMSUNG-SM-G900A using Tapatalk
the_law_man01 is offline   Reply With Quote
Reply



Everest 10 axle shafts? - Similar Threads
Thread Thread Starter Forum Replies Last Post
New Everest 10 came with Gen 7 axle housings Smokin' Joe Redcat Crawlers 11 01-31-2018 03:09 PM
Everest axle swap Rjolly2007 General Crawlers 3 02-28-2017 08:24 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com