Cage “body” available? I know that scale is all the rage, but I’d really like to find the simplest cage possible, rather than have a body (and weight) on top. Has anyone found something like this for the E? [edit] something sorta like this: https://www.dollarhobbyz.com/product...SABEgILhvD_BwE |
Re: Cage “body” available? Buy that one it's proper width for the axles. If you want to do something custom, you'll have to adapt and make parts. The Axial Wraith cage would be a good option too. Sent from my SM-G955U using Tapatalk |
Re: Cage “body” available? I know this post is pretty old but Here is the Wraith cage on the E10https://uploads.tapatalk-cdn.com/202...db03f86a51.jpg Sent from my SM-N960U using Tapatalk |
Re: Cage “body” available? With a little ingenuity you could make a Capra or Wraith cage work. |
Re: Cage “body” available? if you want to make a buggie using the e10 for a donner rig i would just buy a cage and mount the e10 parts in it the wraith would be a almost bolt in swap the gmaid r1 will be hard to mount everything inside the cage and still look scale and would take drilling new holes were a axial product will just need 2 holes slotted to fit the e10 transmission the only parts that are worth swaping are the axles and trans the rest of the parts need replacing/upgrading but can be used if needed there just not as good as even the cheapest chinese junk |
All times are GMT -6. The time now is 03:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com