12-02-2018, 07:17 PM | #1 |
Newbie Join Date: Feb 2011 Location: Colebrook
Posts: 43
| Cage “body” available?
I know that scale is all the rage, but I’d really like to find the simplest cage possible, rather than have a body (and weight) on top. Has anyone found something like this for the E? [edit] something sorta like this: https://www.dollarhobbyz.com/product...SABEgILhvD_BwE Last edited by Raketemensch; 12-02-2018 at 07:22 PM. |
Sponsored Links | |
12-02-2018, 07:28 PM | #2 |
Quarry Creeper Join Date: Jan 2016 Location: Wichita
Posts: 267
| Re: Cage “body” available?
Buy that one it's proper width for the axles. If you want to do something custom, you'll have to adapt and make parts. The Axial Wraith cage would be a good option too. Sent from my SM-G955U using Tapatalk |
05-11-2020, 04:51 AM | #3 |
Rock Stacker Join Date: Aug 2019 Location: Youngstown, OH
Posts: 60
| Re: Cage “body” available?
I know this post is pretty old but Here is the Wraith cage on the E10 Sent from my SM-N960U using Tapatalk |
05-11-2020, 07:23 AM | #4 |
RCC Addict Join Date: May 2009 Location: In the warmth!
Posts: 1,163
| Re: Cage “body” available?
With a little ingenuity you could make a Capra or Wraith cage work.
|
05-11-2020, 07:34 AM | #5 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,259
| Re: Cage “body” available?
if you want to make a buggie using the e10 for a donner rig i would just buy a cage and mount the e10 parts in it the wraith would be a almost bolt in swap the gmaid r1 will be hard to mount everything inside the cage and still look scale and would take drilling new holes were a axial product will just need 2 holes slotted to fit the e10 transmission the only parts that are worth swaping are the axles and trans the rest of the parts need replacing/upgrading but can be used if needed there just not as good as even the cheapest chinese junk |
Thread Tools | |
Display Modes | |
| |