Everest 10 tires

[celticsun33]

First off, I know they suck. I just can't afford new ones right this moment. Here's my question, I've seen guys star cut their foams to soften the tire but still leave it with strength. Will this help my E10?

[brimdogg]

Originally Posted by celticsun33

First off, I know they suck. I just can't afford new ones right this moment. Here's my question, I've seen guys star cut their foams to soften the tire but still leave it with strength. Will this help my E10?

Honestly, unless you're running tons of extra weight, you don't need foam with the stock tires.
I have found that cutting some of the lugs helps more.

Sent from my Pixel 2 using Tapatalk

[ferp420]

Originally Posted by celticsun33

First off, I know they suck. I just can't afford new ones right this moment. Here's my question, I've seen guys star cut their foams to soften the tire but still leave it with strength. Will this help my E10?

take the foams out the tires are stiff enuff to suport the truck with out foams in them then do some selective trimming and they work ok



there actualy ok tires just not for the e10 they work better on heavy trucks when it gets over 100° out

[celticsun33]

Originally Posted by brimdogg

Honestly, unless you're running tons of extra weight, you don't need foam with the stock tires.
I have found that cutting some of the lugs helps more.

Sent from my Pixel 2 using Tapatalk

Not tons but I have been modifying parts to lower the COG and put weight up front. I made a solid brass servo mount that added around .2 lbs (I'm a machinist). Im also working on a brass skid plate/motor tranny mount. That will add weight that will be low and more centralized. I'll try no foam with the extra lbs and add the foam back if I need it. Thanks guys
Which lugs do I cut out of the tires? Any particular?

[brimdogg]

Originally Posted by celticsun33

Not tons but I have been modifying parts to lower the COG and put weight up front. I made a solid brass servo mount that added around .2 lbs (I'm a machinist). Im also working on a brass skid plate/motor tranny mount. That will add weight that will be low and more centralized. I'll try no foam with the extra lbs and add the foam back if I need it. Thanks guys

Which lugs do I cut out of the tires? Any particular?

I've done straight rows across the tread, I've done staggered rows, it really doesn't matter as long as it opens up the space between the rows a bit.

Sent from my Pixel 2 using Tapatalk

[ferp420]

heres my cut pattern for the e10 tires

[ferp420]

dont cut them like this though its bad

[brimdogg]

Originally Posted by ferp420

dont cut them like this though its bad

that's basically how one set of mine are, they're not bad.

Sent from my Pixel 2 using Tapatalk

[ferp420]

Originally Posted by brimdogg

that's basically how one set of mine are, they're not bad.

Sent from my Pixel 2 using Tapatalk

right on it dident work for me alot of hop on the rocks and they seemed to dig more than float in the sand