|
| LinkBack | Thread Tools | Display Modes |
04-08-2022, 11:59 AM | #1 |
Newbie Join Date: Mar 2021 Location: The south sadly
Posts: 18
| Recommended driveshafts for Gen7
What metal or other driveshafts are recommended for the Gen7 to replace the weak stock shafts? Both of my sons have Gen7s and both have broke the rear driveshaft this past week. The U joint broke out of the plastic. I repaired them and printed a sleeve to keep it from splitting again and this time they just twisted apart at the splines. Besides the failure the pins in the joints are about shot anyways. I need shafts that will hold up for a bit and last. |
Sponsored Links | |
04-08-2022, 01:40 PM | #2 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,005
| Re: Recommended driveshafts for Gen7
JunFac steel shafts hold up quite well: Universal Shaft - JunFac Get the measurements from your current ones when fully collapsed and then at full suspension droop - compare to what they have on offer. Once you have the part number, you can browse various shops and/or Amazon/eBay. |
04-08-2022, 07:25 PM | #3 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,258
| Re: Recommended driveshafts for Gen7
any shaft made to fit a scx10 or scx10ii will fit the gen7
|
Recommended driveshafts for Gen7 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My Gen7 Build | bbolden516 | Redcat Crawlers | 4 | 04-28-2021 05:30 PM |
Some Gen7 updates | Mikelangelo | Redcat Crawlers | 9 | 10-03-2018 06:39 AM |
Gen7 modifications | #1 gen7 | Redcat Crawlers | 14 | 07-12-2018 10:39 AM |
Trying to get my gen7 scale. | Nobody79 | 1.9 Scale Rigs | 8 | 05-07-2018 10:03 PM |
Redcat gen7 with 2.2’s? | rj_dio | Redcat Crawlers | 9 | 01-14-2018 08:51 PM |
Thread Tools | |
Display Modes | |
| |