Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Redcat Crawlers
Loading

Notices

Thread: First post, rs10 problem

Reply
 
LinkBack Thread Tools Display Modes
Old 10-26-2014, 11:14 AM   #1
Newbie
 
Join Date: Oct 2014
Location: Willamette Valley
Posts: 2
Default First post, rs10 problem

Ok, my first post on this forum, but ive been lurking for a bit. I have a first gen rs10, and i just replaced the esc with an axial ae2. The problem im having, I think, is improper initial setup. The process is like this: Turn on transmitter, hold full throttle. Turn on esc, continue holding throttle until esc beeps blah blah. The problem is, I get no beeping on full forward. I then go to full brake, esc does fine, then neutral no problem. The symptom Im having is a strange glitch. On flat ground, crawler works fine. Try to climb an obstacle, and one motor will go reverse, and at a different throttle rate (faster) than the other motor. I should say that I did a 540 conversion some time ago, and it was working wonderfully. Any ideas? Im kinda stumped. Motor wiring is fine, as both motors turn the same way under low load situations, and other that clod stall, its perfect. it only seems to happen when trying to cover obstacles....I think its the setup on esc, but I cant get it to program like axials instructions indicate it should. Any and all suggestions short of gasoline and a match will be tried.
CSimpson is offline   Reply With Quote
Sponsored Links
Old 10-26-2014, 11:18 AM   #2
Scale Detail Engineering
 
Join Date: Apr 2010
Location: Turtle Island
Posts: 5,573
Default Re: First post, rs10 problem

So you are running 2 540 motors off 1 AE2 esc?
johnnyh66 is offline   Reply With Quote
Old 10-26-2014, 11:38 AM   #3
Newbie
 
Join Date: Oct 2014
Location: Willamette Valley
Posts: 2
Default Re: First post, rs10 problem

Yes, 2 55 turn 540 motors, one esc. Which has been done successfully before, so I felt comfortable with it.
CSimpson is offline   Reply With Quote
Reply



First post, rs10 problem - Similar Threads
Thread Thread Starter Forum Replies Last Post
RS10 ESC Tekin Fx-R problem? Crawlinyota Redcat Crawlers 1 03-18-2012 08:18 PM
RS10 540 problem tpain123 Redcat Crawlers 5 05-07-2011 10:57 PM
RS10 problem MiddleT Redcat Crawlers 5 03-02-2011 01:36 PM
problem with rs10 esc or tx/rx? fast_eddie_86 Redcat Crawlers 13 09-10-2010 02:35 PM
New Rs10 problem (maybe) tbutkus Redcat Crawlers 10 02-03-2010 12:33 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com