| |||||||
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 |
| Newbie Join Date: Mar 2008 Location: Czech rep.
Posts: 28
| My english isn't perfect but I went thru the rules without problems to this point: 2.1.4 - Winching down of the axles is allowed. The winch line must be attached within a 1/2" of the center of the axle, and by a single attachment point only. Can somebody translate those sentences to ordinary english ? Some pictures may help. Sorry for stupid question, but google says nothing and I have no idea. |
| | |
| Sponsored Links | |
| | #2 |
| TCS Team Manager ![]() Join Date: Feb 2004 Location: on a Big Rock
Posts: 6,260
| Its using a servo or motor, and string to lower the vehicles ride height http://www.youtube.com/watch?v=YiUCXGMWIe4 Last edited by Fishmaxx; 12-23-2008 at 03:01 PM. |
| | |
| | #3 |
| Quarry Creeper Join Date: Jul 2008 Location: Erin, Ontario, CANADA
Posts: 472
| To expand on Fishmaxx's explanation, the reason for locating the cable attachment point within 1/2" of the centre of the axle is so that you can't artificially articulate it with respect to the chassis. Narly1 |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
| |