This is not as fancy as some I have seen. But it keeps me out of trouble.
It has taken several turns in its life. I started out going to leave it outside.
But changed my direction as has other characteristics of this project.
Enjoy.
http://i.imgur.com/OGQDnCt.jpg?1

http://i.imgur.com/pL0rr2H.jpg

http://i.imgur.com/Tgwog38.jpg

Removed the back wall and rear roof.
Then to decide on the office

http://i.imgur.com/cyK0MkE.jpg?2
On to the office build
Was going to do a corrugated metal, but felt it closed it up too much.

http://i.imgur.com/cyK0MkE.jpg?2

Time to unload the wood.

http://i.imgur.com/tjurhHN.jpg?1

Time to rest, That was a lot of lumber.

http://i.imgur.com/H2hMqMo.jpg?1

Building the rails.

http://i.imgur.com/9emBkQk.jpg?1

http://i.imgur.com/DYEYdK1.jpg?1

http://i.imgur.com/d8xJQBQ.jpg?1

Time to sit back and rest.

http://i.imgur.com/WVBjjbY.jpg?1

http://i.imgur.com/mcKebqC.jpg?1

Now this is where we built the first set of stairs.

http://i.imgur.com/OQ8ovOe.jpg?1

http://i.imgur.com/CGFM0f5.jpg?1

http://i.imgur.com/pfLVuhF.jpg?1


Started on the work benches
Overview.


http://i.imgur.com/BUYwHRa.jpg?1

http://i.imgur.com/vyxS5uA.jpg?1

HAd a bit of a lul in work. Took a trip to Disney OK for Crawlapalooza.

http://i.imgur.com/nfsGUow.jpg?1

Picked up a set of jack stands.

http://i.imgur.com/RblLsCn.jpg?1

Few signs

http://i.imgur.com/TekWrQX.jpg?1

And light test for night run

http://i.imgur.com/DHwrAgh.jpg?1

And getting the trailer loaded for a day at the river. Dang no pics of that time.
http://i.imgur.com/3dNAi1S.jpg?1

Ok, had a big summer of outside time so not much on shop stuff.


Changed bodys on the SCX10 to the comanche and picked up a Komoto for the wife.

http://i.imgur.com/VqdarM6.jpg?1

http://i.imgur.com/Mvyp48W.jpg?1

http://i.imgur.com/FVOsF5b.jpg?1

Also added garage doors. and lights

Last group of pictures, thanks for sticking with me thus far.

I stained the wood work so not to look so cheap.
Also redesigned the stairs to a spiral stair case.
Rebuilt the work tables, built 2 tire racks and a tool cart and floor jack.
The biggest thing from this year 2016 was designing and building a 2 post clear floor lift. It is a stationary as it was from scrap materials.

http://i.imgur.com/AQq3hD5.jpg?1

http://i.imgur.com/ljBGFP2.jpg?1

http://i.imgur.com/WCy9ELa.jpg?1

http://i.imgur.com/qoF4wEF.jpg?1

Must have a sink and a fusebox

http://i.imgur.com/GwmRUMC.jpg?1

Some of my favorite pics
http://i.imgur.com/ANHg5Bu.jpg?1

http://i.imgur.com/1HjUCsv.jpg?1


Had to have a lift pump. Not great
http://i.imgur.com/brRQDQI.jpg

Thanks again. will keep updated as i need to rewire the entire place.

Re: My Scale Garage
 

I can't believe no one responded to this. The level of detail is incredible. Excellent job.