Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Why thank you. I put in many years at Hogwarts School of Witchcraft, Wizardry and Trailer Building. Really though, I have no idea as to what I'm doing. I just make it up as I go along. Prototype #3 is already in the planning stages.

Cheers eh,

Todd

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Checking out a 3D printed fender and some wheels. Chassis is in the design stage. Looking to 3D print it as well at the moment. If that doesn't work then it'll be brass most likely.

http://www.rccrawler.com/forum/membe...4569-67297.jpg

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Dang tossed, lookin good! Wat a work of art

Sent from my SM-J327VPP using Tapatalk

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Well, had a bit of time and made a door kit today. Two actually.
http://www.rccrawler.com/forum/membe...4569-67324.jpg


Bit of plywood, Acrylic, Polybak and a sticker all fit together like so. I love the close tolerances.
http://www.rccrawler.com/forum/membe...4569-67325.jpg


It'll look something like this. But with hinges, which are lost in the mess of the bench.
http://www.rccrawler.com/forum/membe...4569-67326.jpg

I also cut a chassis out of 6mm plywood and painted it black. I may still 3D print it or make it out of brass. This was quicker and easier though.
http://www.rccrawler.com/forum/membe...4569-67327.jpg

Tried the front box. It'll look better when it's glued on.
http://www.rccrawler.com/forum/membe...4569-67328.jpg

Here's the bottom view. Needs a couple of more screws at the back.
http://www.rccrawler.com/forum/membe...4569-67329.jpg

Also added a couple of pieces of veneer to the top shelf of the galley to cover up the joints.
http://www.rccrawler.com/forum/membe...4569-67330.jpg

Axles and leaf springs are up next.

Cheers eh,

Todd

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Wat a work of art tossed! That trailer is turnin out beautiful. So much detail.

Sent from my SM-J327VPP using Tapatalk

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Thanks Indy. Got any really tiny functional door handles?

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Ill look n see if i got anything that may help u out

Sent from my SM-J327VPP using Tapatalk

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Hey, just kidding, don't worry about it, I've got some ideas.

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Ive got a few ideas for handles myself lol. The bed im using for my winter build is a utility/flat bed. Goina try n make some boxes for under side infront of the rear tires.

Sent from my SM-J327VPP using Tapatalk

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

A bit of Tamiya Smoke PS-31 and I have tinted windows. Here they are mocked up.

http://www.rccrawler.com/forum/membe...4569-67340.jpg

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

And now the wait is on. Need M1 X 8 bolts and nuts for the hinges. Hurry up mailman!

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

While waiting for the tiny door hardware I decided to recut the chassis.
http://www.rccrawler.com/forum/membe...4569-67385.jpg

Here's V2 but the holes for mounting the suspension are too big.
http://www.rccrawler.com/forum/membe...4569-67383.jpg

So, on to V3, smaller holes, still bigger than they need to be though but they'll do for now. Trimmed the chassis up a bit to match the shape of the suspension brackets.
http://www.rccrawler.com/forum/membe...4569-67384.jpg

I 3D printed the suspension. It's not going to last as all I had was PLA but I'll redo it using PTEG most likely. I modified the suspension that Ossum posted to Thingiverse for his M416 Trailer. Basically just made it wider.. We'll see how that goes.
http://www.rccrawler.com/forum/membe...4569-67386.jpg

http://www.rccrawler.com/forum/membe...4569-67387.jpg

http://www.rccrawler.com/forum/membe...4569-67388.jpg

http://www.rccrawler.com/forum/membe...4569-67389.jpg

A view underneath.
http://www.rccrawler.com/forum/membe...4569-67390.jpg

Didn't have any threaded rod for the axle but a bamboo skewer will work for now.
http://www.rccrawler.com/forum/membe...4569-67391.jpg

The fender is also from Ossum's trailer. Need to redo the galley hatch as it's not quite square.
http://www.rccrawler.com/forum/membe...4569-67392.jpg

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Dang, that looks great tossed! Comin together nicely. The detail is amazing. Keep up the good work

Sent from my SM-J327VPP using Tapatalk

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Great looking Trailer.
Detail is amazing..

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Thanks fellas!

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Busy week so I didn't get too much done. I narrowed the fenders by 10mm and reprinted them. Prototyped a side using white mat board (it cuts so nicely on the laser) to get the bolt holes for the fender in the right place. Looks a little better with the narrower fenders I think. I'll recut the sides with bolt holes for the fenders in V3.

http://www.rccrawler.com/forum/membe...4569-67406.jpg

http://www.rccrawler.com/forum/membe...4569-67407.jpg

http://www.rccrawler.com/forum/membe...4569-67408.jpg

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

This is definitely a need now!! Wish it would be mass produced!!!

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Thanks. Yeah, mass production ain’t going to happen. A one off I think, or maybe 2 if my son keeps after me.

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

Still waiting on the 1mm hardware for the hinges. Got the nuts but no bolts. I printed some new fenders that are more in the style of the TerraDrop Alpha. Here they are right out of the 3D printer. A bit of cleanup and some sanding and paint and I think I've got it. Spent some more time redesigning a few little bits for V3. Hope to cut it this week. It will also have pre-cut holes for the fenders.

http://www.rccrawler.com/forum/membe...4569-67464.jpg

Re: Scale Oregon Trail’R Terradrop Alpha Off-Road Teardrop Trailer
 

WOW......just WOW."thumbsup"